BSS Audio Soundweb 9088i Manual

BSS Audio Ikke kategoriseret Soundweb 9088i

Læs gratis den danske manual til BSS Audio Soundweb 9088i (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om BSS Audio Soundweb 9088i, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

127

Soundweb

SoundwebSoundweb

Soundweb

TMTM

9088 9088

9088

Installation Guide

128

Soundweb

Regulatory Information

An example of this equipment has been tested and found to comply with the following European

and international Standards for Electromagnetic Compatibility and Electrical Safety:

Radiated Emissions (EU): EN55013 (1990) Associated

Equipment

Immunity (EU): EN50082/1 (1992) RF Immunity, Fast

Transients ESD

Mains Disturbance (EU): EN61000/3/2 (1995)

Electrical Safety (EU): EN60065 (1993)

Radiated Emissions (USA): FCC part 15 Class B

Electrical safety (USA): UL813

Mechanical Installation

v1.2 JK 4th June 1998

Important user information

Do not remove covers. No user serviceable parts inside, refer servicing to qualified service

personnel. For continued compliance with international EMC regulations, it is important that all

cables be screened, and connected as follows: Audio cable screens to their 9088 connector

ground. Control cable screens to the ground screws adjacent to the connector. Network cables

should be of type CAT.5, fitted with a clip-on ferrite sleeve (STEWART TYPE 28A2029-0A0) near

the network socket end. This equipment must be earthed. It should not be necessary to remove any

protective earth or signal cable shield connections to prevent ground loops. Any such

disconnections are outside the recommended practice of BSS Audio, and will render the EMC or

safety certificate void.

If the unit is likely to undergo extreme vibration through extensive road trucking and touring, the

unit must be supported at the rear and/or sides to lessen the stress on the front mounting flange.

The necessary support can generally be bought ready-built as a rack tray, or the 9088 unit can be

mounted between other units. Damage caused by insufficient support is not covered by the

warranty. To prevent cosmetic damage to the front panel finish, use protective plastic cups under

the rack mounting bolts.

Produkt Specifikationer

Mærke:	BSS Audio
Kategori:	Ikke kategoriseret
Model:	Soundweb 9088i

Har du brug for hjælp?

Hvis du har brug for hjælp til BSS Audio Soundweb 9088i stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret BSS Audio Manualer

BSS Audio Soundweb 9088i Manual

14 September 2025

BSS Audio FDS-366T Manual

14 September 2025

BSS Audio ATEM Mini Extreme Manual

30 Juli 2025

BSS Audio ATEM Mini Manual

30 Juli 2025

BSS Audio Soundweb London 9015US Manual

26 Marts 2025

BSS Audio DPR-402 Manual

27 August 2024

BSS Audio FDS-310 Manual

27 August 2024

BSS Audio Soundweb 9010 Manual

27 August 2024

BSS Audio MSR-602 Manual

27 August 2024

BSS Audio FCS-966 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AMX NMX-ENC-1100 Manual

14 September 2025

AMX UPC20+ Manual

14 September 2025

AMX DGX-I-DXL Manual

14 September 2025

AMX DGX-O-HDMI Manual

14 September 2025

AMX EXB-MP1 Manual

14 September 2025

AMX DGX-I-DXF-SMD Manual

14 September 2025

AMX AVB-WP-TX-MULTI-DXLINK Manual

14 September 2025

AMX NMX-ENC-N1133A Manual

14 September 2025

AMX NCITE-813 Manual

14 September 2025

AMX RE-DM6 Manual

14 September 2025