Buffalo TeraStation 4200D Manual

Buffalo Server TeraStation 4200D

Læs gratis den danske manual til Buffalo TeraStation 4200D (4 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Buffalo TeraStation 4200D, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
The TS4000 series will not work without disks. Please prepare 1 or more un-partitioned
HDDs for the setup process. Use either new HDD(s) or delete all partitions (and
therefore all data) with a partition editor before you start with existing HDD(s).
Step by step
1. Mount one or more HDDs to a frame and insert it in the TeraStation™.
2. Prepare the MicroSD and the USB adapter and insert the USB
adapter into a USB 2.0 port, connect power and network.
3. Move the boot switch to USB position.
4. Boot the TeraStation™.
Now the unit gives after some minutes a tone, the display
goes red and it says “push function button to start”.
5. Push the function button until beep sounds.
The display status color will be blue and sequence through these messages:
Recovery Preparing
System Recovering
FW/Updating
Recovery Finished, “Change Boot SW”
Setup Guide
TeraStation™ 4000
www.buffalo-technology.com
Setup Guide
TeraStation™ 4000
www.buffalo-technology.com
6. The TeraStation™ will shut down and the Power button will no
longer be lit green. The display and Info light stay on.
7. Remove the USB adapter, move the switch on the
back to HDD, press the power button
If you use just one drive you will have a brief warning for missing
HDDs and afterwards the TeraStation™ will operate normally.
If you use more than one drive: The first HDD is mounted and will work normally
and the other HDDs are mounted but not yet formatted. The display will therefore
turn red and the status LEDs of all unformatted drives will show red as well.
The warning, red display, and red LEDs will remain until you finish formatting all HDDs.
8. Now please install the NAS Navigator on your computer and click
‘Refresh’ to reveal your new TeraStation™ 4000. Right click on it and select
‘Settings’. A browser window will launch the admin interface. It’s also
possible to access the admin interface by entering the TS4000 series IP
address (shown on the TS’s display) directly into a browser window.

Produkt Specifikationer

Mærke: Buffalo
Kategori: Server
Model: TeraStation 4200D

Har du brug for hjælp?

Hvis du har brug for hjælp til Buffalo TeraStation 4200D stil et spørgsmål nedenfor, og andre brugere vil svare dig


Server Buffalo Manualer

Buffalo

Buffalo TeraStation WSH5610DN Manual

4 August 2024
Buffalo

Buffalo PD-1000S-L Manual

4 August 2024
Buffalo

Buffalo TeraStation 5210DN Manual

3 August 2024
Buffalo

Buffalo 2TB LinkStation Mini Manual

1 August 2024
Buffalo

Buffalo 12TB LinkStation Pro Quad Manual

31 Juli 2024
Buffalo

Buffalo TS4400D Manual

31 Juli 2024
Buffalo

Buffalo LinkStation Pro Manual

29 Juli 2024
Buffalo

Buffalo LS210D0201C Manual

29 Juli 2024
Buffalo

Buffalo LS-WV2.0TL/R1-EU Manual

28 Juli 2024
Buffalo

Buffalo TeraStation WS5600 Manual

28 Juli 2024

Server Manualer

Nyeste Server Manualer

Asus

Asus RS540-E8-RS36-ECP Manual

13 August 2025
Asus

Asus RS300-E6/PS2 Manual

12 August 2025
Asus

Asus RS120-E5/PA4 Manual

12 August 2025
Asus

Asus P5BP-E/4L Manual

11 August 2025
Dell

Dell PowerEdge M915 Manual

9 August 2025
Dell

Dell PowerEdge R360 Manual

9 August 2025
Dell

Dell PowerEdge T360 Manual

9 August 2025
Dell

Dell PowerEdge C5230 Manual

9 August 2025
Dell

Dell PowerEdge M1000E Manual

9 August 2025
Planet

Planet ICS-2100T Manual

9 August 2025