Buffalo TeraStation 4400R Manual

Buffalo Server TeraStation 4400R

Læs gratis den danske manual til Buffalo TeraStation 4400R (4 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Buffalo TeraStation 4400R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

The TS4000 series will not work without disks. Please prepare 1 or more un-partitioned

HDDs for the setup process. Use either new HDD(s) or delete all partitions (and

therefore all data) with a partition editor before you start with existing HDD(s).

Step by step

1. Mount one or more HDDs to a frame and insert it in the TeraStation™.

2. Prepare the MicroSD and the USB adapter and insert the USB

adapter into a USB 2.0 port, connect power and network.

3. Move the boot switch to USB position.

4. Boot the TeraStation™.

Now the unit gives after some minutes a tone, the display

goes red and it says “push function button to start”.

5. Push the function button until beep sounds.

The display status color will be blue and sequence through these messages:

 Recovery Preparing

 System Recovering

 FW/Updating

 Recovery Finished, “Change Boot SW”

Setup Guide

TeraStation™ 4000

www.buffalo-technology.com

Setup Guide

TeraStation™ 4000

www.buffalo-technology.com

6. The TeraStation™ will shut down and the Power button will no

longer be lit green. The display and Info light stay on.

7. Remove the USB adapter, move the switch on the

back to HDD, press the power button

If you use just one drive you will have a brief warning for missing

HDDs and afterwards the TeraStation™ will operate normally.

If you use more than one drive: The ﬁrst HDD is mounted and will work normally

and the other HDDs are mounted but not yet formatted. The display will therefore

turn red and the status LEDs of all unformatted drives will show red as well.

The warning, red display, and red LEDs will remain until you ﬁnish formatting all HDDs.

8. Now please install the NAS Navigator on your computer and click

‘Refresh’ to reveal your new TeraStation™ 4000. Right click on it and select

‘Settings’. A browser window will launch the admin interface. It’s also

possible to access the admin interface by entering the TS4000 series IP

address (shown on the TS’s display) directly into a browser window.

Produkt Specifikationer

Mærke:	Buffalo
Kategori:	Server
Model:	TeraStation 4400R

Har du brug for hjælp?

Hvis du har brug for hjælp til Buffalo TeraStation 4400R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Server Buffalo Manualer

Buffalo TeraStation WSH5610DN Manual

4 August 2024

Buffalo PD-1000S-L Manual

4 August 2024

Buffalo TeraStation 5210DN Manual

3 August 2024

Buffalo 2TB LinkStation Mini Manual

1 August 2024

Buffalo 12TB LinkStation Pro Quad Manual

31 Juli 2024

Buffalo TS4400D Manual

31 Juli 2024

Buffalo LinkStation Pro Manual

29 Juli 2024

Buffalo LS210D0201C Manual

29 Juli 2024

Buffalo LS-WV2.0TL/R1-EU Manual

28 Juli 2024

Buffalo TeraStation WS5600 Manual

28 Juli 2024

Server Manualer

Nyeste Server Manualer

Asus RS540-E8-RS36-ECP Manual

13 August 2025

Asus RS300-E6/PS2 Manual

12 August 2025

Asus RS120-E5/PA4 Manual

12 August 2025

Asus P5BP-E/4L Manual

11 August 2025

Dell PowerEdge M915 Manual

9 August 2025

Dell PowerEdge R360 Manual

9 August 2025

Dell PowerEdge T360 Manual

9 August 2025

Dell PowerEdge C5230 Manual

9 August 2025

Dell PowerEdge M1000E Manual

9 August 2025

Planet ICS-2100T Manual

9 August 2025