Bushnell 743333 Manual

Bushnell Ikke kategoriseret 743333

Læs gratis den danske manual til Bushnell 743333 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Bushnell 743333, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Professional

BORE SIGHTER Model # 743333

Instruction

Manual

The Bushnell Professional Boresighter is an essential tool for quickly adjusting scope or

iron sights to align with the rie or handgun barrel. Correct use of your Boresighter will

put sighting-in test shots “on the paper”, requiring only minor expenditure of time and

ammunition by test ring to achieve pin-point zero at a given distance. Because of the many

variables involved in both ammunition and the rearm itself, nal “sighting in” must be done

by actual ring.

Professional Boresighter Kit

Model# 743333

Fig. 1

HOW TO BORE SIGHT A SCOPE-MOUNTED RIFLE OR HANDGUN

Scope/Rie Combination

Once you have secured the Boresighter, place the rie on a suitable support. Remove the

adjustment caps from your riescope. Then sight through the riescope and align the reticle

with the crosshairs of the graduated grid reticle in the Boresighter by using the riescope’s

elevation and windage adjustments. Once you have aligned the riescope reticle with the

graduated grid reticle in the Boresighter, you are ready for sighting-in on the range. If bore

sighting has been done properly, sighting-in should take a minimum of time and ammunition.

HOW TO INSERT THE EXPANDABLE ARBOR INTO THE GUN BARREL

Place the gun with mounted scope into a suitable support. Select the proper arbor and make

sure the expandable tips are completely closed by turning the arbor’s locking nut (Fig. 1/2: A)

counter-clockwise until the tips contract. Insert the small end of the arbor into the Boresighter

mount with the at area down, so that the end of the clamp screw will bear against (Fig. 1/2: B)

the at surface. Turn the screw clockwise until it is ngertight. Now, with the Boresighter in an

upright position, insert the arbor into the barrel and push it forward carefully until the muzzle

rests against the tapered section of the arbor ). With the arbor locking nut loosened, (Fig. 2)

and while looking through the scope, swing the Boresighter to align vertical grid lines with

the scope reticle. Turn the arbor locking nut clockwise until the arbor holds rmly to the bore;

the expandable tips prevent the Boresighter from turning of its own weight.

NOTE: To remove the arbor from the barrel, simply loosen the arbor locking nut (Fig 1: A),

push inward to retract the tips, and pull the unit from the barrel.

Fig. 2

Produkt Specifikationer

Mærke:	Bushnell
Kategori:	Ikke kategoriseret
Model:	743333

Har du brug for hjælp?

Hvis du har brug for hjælp til Bushnell 743333 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Bushnell Manualer

Bushnell Spot On 66060WM Manual

30 December 2025

Bushnell CelluCORE 24 Manual

8 December 2024

Bushnell Trail Sentry 119302 Manual

8 December 2024

Bushnell 119512B Manual

16 November 2024

Bushnell Elite Tactical DMR3 Manual

27 August 2024

Bushnell Elite Tactical XRS3 Manual

27 August 2024

Bushnell Trail Sentry 119305 Manual

22 August 2024

Bushnell Trophy Cam 119426C Manual

22 August 2024

Bushnell 119422CW Manual

22 August 2024

Bushnell Trophy Cam 119628C Manual

22 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Phase Technology V626 Manual

6 Juli 2025

Noctua NV-FH2 Manual

6 Juli 2025

American DJ Jolt Bar FXIP Manual

6 Juli 2025

Hisense RS694N4BBE Manual

6 Juli 2025

Extron IPCP Pro 555Q xi Manual

6 Juli 2025

Brizo Charlotte 692485-BN Manual

6 Juli 2025

Schwaiger HSP300 531 Manual

6 Juli 2025

Alcatel TMax 70 Manual

6 Juli 2025

American DJ ElectraPix Bar 16 Manual

6 Juli 2025

Vimar 01594 Manual

6 Juli 2025