MP3 Downloadable
Wire Free Chime Kit
™41: Press the Bell Push to 
confirm the setup
 
2: The Chime will play the 
melody and the alert light will 
flash. 
4
2
1: Place a small flat screwdriver 
    into the locking clip on the   
    base of the Bell Push.
2: Gently twist. 
3: The backing plate will unclip. 
1
™
   1: Push Button    6: Portable Chime 
   2: Melody Selector    7: Speaker  
   3: Bell Push Battery   8: Volume Control    
   4: Signal Sent LED    9: LED Alert
 5: USB Lead               10: USB Input
MP001
™
:3
1: 
4:  10: 
8: 
9: 
5: 
6: 
2: 
31: Remove the battery cover. 
 2: Insert 3 X 1.5V Size ‘AA’       
    batteries (Not Supplied).
3: Make sure the     
    Positive/Negative terminals
    match the internal markings  
 
4: switch the Chime ON 
5: Replace the battery cover.
1: Insert CR2032 battery 
    (Supplied) into the battery 
    holder.
2: Make sure the positive side  
    is facing upwards.
3: Replace back plate.
Warning: Make sure that the batteries are 
replaced correctly to avoid battery failure. 
Only replace with same or equivalent type.
3
Downloading MP3 Melody:
Functions:
To select the Chime Volume 
level, press the ‘+’ button  
increase the volume and ‘-’ 
button to decrease the volume. 
To select a melody for the Door Chime 
1: Select between preprogrammed (IN) or 
    downloaded MP3 melodies (MP3).
2: Press the       arrows on the door    
    chime to select the next melody
 
3: The chime will play the newly selected 
     melody
4: Press the centre button to confirm
    Or press     arrows to select the next 
    melody.
   
1: Connect the chime to the 
USB port of a computer using 
the USB lead (supplied ).
PC Only
2: The Chime will appear as a USB 
storage device, install and run MP3 
Editor.exe file on your computer.
MP3 Music
Look in:
Open
MP3 File(*.mp3)
File Name:
Files of Type:
Open
Cancel
Melody File 1
Melody File 2
Melody File 3
Melody File 4
3: Select the open file icon       , 
highlight the required MP3 file on 
your PC and click Open.
5: Edit the file length by inputting the required start and end times. 
Use the Play/Pause button to listen to the mp3 file, recommended file 
length is between 8-10sec.
5: Press the scissors icon to Cut and save the MP3 file, the 
recommended file length is approximately  long.  8-10 seconds
   Melody File 1 Melody File 2 Melody File 3
   Back Search Folders
E:\Address
PC & Mac
6: Drag and drop the edited file onto the MP3 Chime, the file will be 
saved on to the MP3 chimes internal memory.
00:00.0 / 00:00.0
00Start Time
End Time
00
   00 00 0
0:
:
.
.Reset
 Rewind Fast 
Forward
Play Volume
Stop
Press to Cut
4: Highlight the MP3 file in the tunes list and press PLAY.
Video Tutorial:
View or video tutorial saved on the MP3 chime or via our 
YouTube channel.
http://www.youtube.com/user/CHByron