Signal system; PAL/NTSC
Monitor size: 1 inch TFT LED screen10.
Resolution: 1024(W) x 600(H)
Frequency response: 20Hz to 20kHz (1 dB)
Video output: V p-p 5 Ohm unbalanced1 7
Audio output: Vrms / 1 KHz, 0 dB1.2
Dynamic range: >85dB
Laser: Semiconductor laser, Wave length: 650nm
Compatible discs/files: CD / DVD / VCD / MP3 / MPEG4 / DivX / JPEG
Built-in connections: - Standard USB 2.0 reader
- Standard SD card reader
- 3.5mm Jack headphone socket
- 3.5mm AV-output (jack to jack cable included • to connect other player / additional monitor)
- 3.5mm AV-input (jack to jack cable included • to function as additional monitor)
- DC input (Warning! only us provided V charger (with cigarette lighter plug) 12~24
or an original Caliber 2 (not incl.) wall adapter). PS3
- DC output (does not apply)
Power supply: DC 9-12V 1.0A
Power consumption: <1 5W
Operating temperature: 0~35
o
C
Battery Type: 1200 mAh Li Polymer, output: 7.4V
Size player (closed) (W) (H): 242 x 183 x 39(D) mm
How to use the headrest mount
Close the desk stand on the back of the unit and lay the player face down on a soft surface so it will not be
damaged.
1. Lay the short strap which has the retainer on it across the back as shown.
2. Pass the longer strap through one of the fixing loops on the back panel.
3. Now thread the strap through the retainer on the center of the other strap.
4. Pass the strap through the other fixing loop.
5. The straps are now in place.
- Hold the player in position on the back of a front seat headrest.
- While holding the player securely in place, loop the straps
around the the headrest, securing the ends with the clips.
123 4
5
We are continuously improving/updating our products and product information.
It’s therefore possible that there is a slight dierence between the description in this manual to the operation of the product.
If something is dierent or not clear; always check our website for the most current version.