Canarm/Delhi BI series blowers are specifically designed as a quiet and efficient blower. The BI series incorporates a backwardly inclined (BI)
blade configuration to generate air moving performance. The BI series are single inlet blowers,which have a standard CCW rotation. The discharge
direction may be easily altered to any one of eight positions without removal of the wheel venturi or housing.
* Flexible inlet and outlet collars are recommended to minimize
vibration transmission.
BI SERIES –
UTILITY BLOWERS
Operation Instructions & Parts Manual
READ AND SAVE THESE INSTRUCTIONS
Installation or Product problems? Do not return to store of purchase.
Contact Canarm Service at 1-800-265-1833 (CANADA) 1-800-267-4427 (U.S.A.)
1-800-567-2513 (EN FRANCAIS) Monday to Friday 8:00 - 5:00pm e.s.t.
BI SERIES UTILITY BLOWERS MODELS: BI-10 – BI-36; BI-10RM – BI-36RM
Rotating parts (pulleys, shafts, belts) on fans should not be exposed. Where these components are not protected by ductwork, cabinets or
covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be opened with the fan operating
to avoid foreign objects being drawn into the system. On initial start-up a careful inspection should be carried out to ensure no foreign material
is present which could become airborne in the system.
Read installation and operation instructions carefully before attempting to install, operate or service Canarm/Delhi BI/BI – RM series blowers.
Failure to comply with instructions could result in personal injury and/or property damage. Retain instructions for future reference.
Inspect unit for damage and report any shipping damage to carrier. Check all fasteners and re-tighten as required. Rotate the blower wheel by
hand to ensure free rotation. If rubbing occurs, loosen the inlet venturi bolts, re-position the venturi to establish clearance, re-tighten bolts.
Canarm Ltd. - Corporate Head Office 2157 Parkedale Avenue, PO Box 367 Brockville, Ontario Canada K6V 5V6
Tel: (613) 342-5424; Fax: (613) 342-8437
www.canarm.com hvacsales@canarm.ca
GENERAL SAFETY
UNIT DESCRIPTION
BEFORE YOU BEGIN
