Canarm BTA12T10075A Manual

Canarm Ventilator BTA12T10075A

Læs gratis den danske manual til Canarm BTA12T10075A (11 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Canarm BTA12T10075A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

TUBEAXIAL-M

INSTALLATION, OPERATION, AND MAINTENANCE MANUAL

TUBE AXIAL FANS

BTA, WTA, HTA, DDA

The purpose of this manual is to aid in the proper installation and operation of the fans.

These instructions are intended to supplement good general practices and are not intended to

cover detailed instruction procedures. It is the responsibility of the purchaser to assure that the

installation and maintenance of this equipment is handled by qualified personnel.

Inspect all shipments carefully for damage. THE RECEIVER MUST NOTE ANY

DAMAGE ON THE CARRIER’S BILL OF LADING AND FILE A CLAIM

IMMEDIATELY WITH THE FREIGHT COMPANY.

INSTALLATION

1. The fans, when lifted, should be lifted using the flanged ends of the tube or by placing a

sling around the fan tube, and never by the motor, belt tube or motor base.

2. Caution: The fan contains rotating parts and requires electrical service. Appropriate

safety precautions should be taken during installation, operation and maintenance.

3. All electrical work must be done, in accordance with all applicable electrical codes, by a

qualified electrician.

4. Prior to wiring, ensure that the power supply is locked in the OFF position and that the

motor nameplate voltage and the supply voltage match.

5. Be sure to keep all electrical wiring clear of any moving parts.

6. Tighten all nuts, bolts and setscrews to the proper torque settings (see chart), as some

may have loosened during shipping.

7. Before starting the fan, ensure that the wheel rotates freely.

8. On belt driven fans, assure that the belts are aligned and tensioned correctly.

9. Assure that all protective guards and other safety devices are installed properly prior to

fan start-up.

Produkt Specifikationer

Mærke:	Canarm
Kategori:	Ventilator
Model:	BTA12T10075A

Har du brug for hjælp?

Hvis du har brug for hjælp til Canarm BTA12T10075A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ventilator Canarm Manualer

Canarm HVR24 Manual

10 Januar 2026

Canarm XBL36 Manual

10 Januar 2026

Canarm BTA15T10075A Manual

10 Januar 2026

Canarm BTA42T10200 Manual

10 Januar 2026

Canarm BTA12T10075A Manual

10 Januar 2026

Canarm BTA15T30075A Manual

9 Januar 2026

Canarm ADD14 Manual

9 Januar 2026

Canarm BTA18T30100 Manual

9 Januar 2026

Canarm HV42 Manual

9 Januar 2026

Canarm P24 Manual

9 Januar 2026

Ventilator Manualer

Nyeste Ventilator Manualer

Lasko WhisperForce TDC425 Manual

10 Januar 2026

Vaxcel Wheelock F0051 Manual

9 Januar 2026

Broan Roomside BES8 Manual

9 Januar 2026

Vaxcel Wheelock F0079 Manual

9 Januar 2026

Lasko Misto YF321 Manual

8 Januar 2026

Vaxcel Charleston F0044 Manual

8 Januar 2026

Lasko WhisperForce UDC351 Manual

8 Januar 2026

Lasko Elite Collection S18610 Manual

7 Januar 2026

Lasko 2522 Manual

7 Januar 2026

Lasko WhisperForce TDC487 Manual

7 Januar 2026