
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (613) 342-8437
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“SAVE THESE INSTRUCTIONS”
4.  Connect the ground wire
(bare copper or green) from
your fixture to the ground
wire (bare copper or green)
electrical outlet box.   Connect 
black wire from fixture to black 
wire in outlet box and connect 
the white wire from fixture to 
white wire in outlet box.
5.  Tuck electrical wires into 
outlet box and position fixture 
mounting bracket assembly. 
Secure fixture in place with star 
6.  Install the proper bulb
1.  Loosen “B”.    Adjust stud to 
desired length and lock in place 
bracket to outlet box using 
Make sure the studs or nipple 
on the mounting bracket are 
facing out from the outlet box.
3.  Screw lower downrod into 
the fixture.    Install swivel to the 
rod, ensuring that the sleeve is 
at the swivel.    Tighten the 
locking nut to secure rod to the 
Note:  Remove fixture pan, plate 
and rods if required (If you wish 
to change the downrod length) 
Install the length of rod that is 
required by threading wire 
through the rod and securing it 
Caution: Risk of fire, keep at least 
an 14 3/4” distance from the 
ceiling to the top surface of 
TOOLS AND MATERIALS REQUIRED:
QUESTIONS OR CONCERNS CONTACT CANARM AT:
     1-800-265-1833 (English)      1-800-567-2513 (French)   
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
1.  TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. 
2.  THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
      BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
3.  CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE  TO THE GROUND 
      WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.