SAFETY PRECAUTIONS:
LFM112A
05/16
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver Wire Cutters
Pliers Wrench
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY 
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTALLATION:
NOTE:  Product may not look exactly as shown in figures.
Wiring supplies 
as required by 
local electrical 
code
LED
FLUSH MOUNT
1.  TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. 
2.  THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
      BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
      HAZARDS INVOLVED.
3.  CAUTION – RISK OF FIRE.  CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
      CIRCUIT CONDUCTOR.
4.  CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE  TO THE GROUND 
      WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX. 
5.  TO CLEAN THE FIXTURE,  TURN OFF THE POWER,  WAIT FOR IT TO COOL,  AND WIPE THE FIXTURE WITH A 
      CLEAN,  SOFT CLOTH.
 
Bracket
3.  Connect the ground wire (bare 
copper or green) from your fixture to 
the ground wire (bare copper or 
green) or ground screw in the 
electrical box.  Connect the black wire 
(or wire with marking) from the fixture 
to the black wire in the electrical box 
and connect the white wire from the 
fixture to the white wire in the 
electrical box.
NOTE: Do not disconnect any 
pre-wired connections.
4.   Once wire connections are
completed, carefully tuck wires and
wire nuts into the outlet box making
sure no bare wire (on the black and
white) is visible at the wire nuts.
5.  Attach the fixture to the 
mounting screws, turn fixture 
clockwise, and tighten screws.
6.  Reverse the process of step #1 to 
install the fixture.
1.  Unscrew the 3 cap nuts  
as shown to remove the 
brackets, metal ring and 
diffuser. 
2.  Secure the mounting 
screws (only screwing on 
halfway) to  electrical box.
House supply
Ground wire
Fixture
Ground wire White
Black
Cap Nut
Metal
Ring
Diffuser
Mounting screws
Mounting screws
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-267-4427 (English)  / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.