
Tel: (613) 342-5424, Fax: (800) 263-4598
4. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no
bare wire (on the black and
white) is visible at the wire nuts.
Install the light fixture to the
wall by aligning the hole(s) in
the fixture with the studs on
the mounting bracket. Secure
in place with cap nut(s) and star
5. Install the proper bulb type
and wattage (not included).
6. After Installation, seal
perimeter between the fixture
and the wall surface with
weather resistant caulking. The
un-caulked to prevent moisture
build-up. Apply a small amount
of weather resistant caulking
around the side perimeter
electrical box with electrical
(push) electrical wires from
electric box (house wiring)
Option 2: For multiple black
(live) & white (neutral) wires
joined in the electrical box
single “black” and “white”
from a 6” Jumper Wires (AWG
connect (push) wires into
electrical wires from fixture
INSTALLATION INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
NOTE: Product may not look exactly as shown in figures.
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.