Canon EF 35MM F2 IS USM Manual

Canon Linse EF 35MM F2 IS USM

Læs gratis den danske manual til Canon EF 35MM F2 IS USM (10 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Canon EF 35MM F2 IS USM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

CT1-7622-000 1206SZ

©CANON

INC. 2012 PRINTED

JAPAN

EF35mm

USM

STABILIZER

ONt

rOFF

(]!I[)

11\9/

Button

Bouton

Bot6n

loss

vision.

Looking

the

sun

directly

through

the

lens

especially

hazardous.

Whether

it is attached to

the

camera

or not, do not

leave

the

lens under

the

sun

without

the

lens

cap

attached.

This

prevent

the

lens

from

concent

rating

the

sun

rays

which

could

cause

fire

Handling

Cautions

• If the lens is taken from a cold environment into a warm one, condensation

may

develop

the lens surface and internal parts.

prevent

condensation

case

, f

irs

put

lens

into

airtight

plastic

bag

before

taking

from

cold

warm

environment.

Then

take

out

the

lens

aHer

has

warmed

gradually.

the

same

when

taking

the

lens

from

warm

environment

into

cold

one.

•

not

leave

the

tens

excessive

heat

such

a car

direct sunlight. High tem.peratures 1

can cause the lens

malfunction.

__j

Conventions

used

this

instruction

0 Warning to prevent lens

camera malfunction

damage.

Ei!

Supplementary notes on using the lens and taking pictures.

Mounting

and

Detaching

the

Lens

See

your

camera's

instructions

for

details

mounting

and

detaching

the

lens.

O e After detaching the lens, place the lens with the the rear end up to prevent lens

surface and contacts from getting scratched.

e If the contacts

get

soiled, , scratched

have fingerprints

them, corrosion

faulty connections can result.

The

camera and lens may not operate properly.

e If the contacts

get

soiled

have fingerprints

them them , clean with a soft cloth.

e If you remove the lens, cover it with the dust cap.

attach it properly, align the

lens mount index and the 0 index of the dust cap, and turn clockwise

remove

it,

reverse the order.

Setting

the

Focus

Mode

shoot in autofocus (AF) mode mode , set the focus switch to AF &.

shoot in manual focus focus (MF) mode, set the mode switch to

MF,

and focus by turning

the focusing focusing ring. The ring always works, regardless of the focus mode

fE¥1

After autofocusing in

ONE

SHOT

mode, focus manually by pressing the shutter

l..jJ button halfway and turning the focusing ring. (Full-time manual focus)

Infinity

Compensation

Mark

compensate for shifting of the infinity focus point that results from changes

temperature.

The

infinity position at at normal temperature is the point which the vertical line of the

distance distance scale L mark is aligned with the index

0 .

0 For accurate manual focusing of subjects at infinity, look through the viewfinder

look at the magnified image•

the LCD screen while rotating the focusing ring.

• For cameras with Live View shooting capability.

Image

Stabilizer

You

can use the Image Stabilizer in AF or

mode.

This function provides optimal image stabilization depending on shooting conditions

(such as shooting still subjects and following shots).

1. Set the STABILIZER switch to ON 0 .

• If you are not going to use the image stabilizer function, set the switch to OFF.

2. When you press the shutter button halfway, the Image Stabilizer will start operating.

0 Make sure the image in the viewfinder

stable, then press the shutter button the rest of

the way down to take the picture.

O e The

Image

Stabilizer cannot compensate

for

blurred

shot

caused

a subject that

moved.

The

Image

Stabilizer

may

not

fully effective if

you

shoot

from

a violently shaking vehicle

or other transportation.

•

The

Image

Stabilizer

consumes

power

than

normal

shooting,

fewer

shots

can

taken

you

use

the

function.

Ei!

When

shooting a still

subject,

compensates

for

camera

shake

all

directions.

compensates

for

vertical camera

shake

during

following

shots

a horizontal direction,

and

compensates

for

horizontal camera

shake

during following shots

a vertical direction.

•

When

you

use

a , tripod

the

Image

Stabilizer should

turned

off

save

battery power.

The

stabilizer

equally effective

for

handheld photography

and

photography

with

monopod.

The Image Stabilizer effect

may

reduced

however,

depending

the

shooting

environment.

•

The

Image

Stabilizer

also

operates

when

the

lens

used

with

extension

tube

EF12

EF25

II.

you

set

the

camera's Custom Function to

change

the

assigned

button

operate

the

AF,

the

Image

Stabilizer

will

operate

when

you

press

the

newly

assigned

button.

Hood

(Sold

Separately)

The

EW· 72 hood can keep unwanted light out of the the lens, and also protects lens from

rain, snow, and dust.

attach the the hood mark , align the hood's attachment position with red dot on the front

of the the lens, then turn the the the hood in direction of arrow until lens's red dot is aligned

with the hood mark 's stop position

remove the hood , hold down the button

the side and turn the the hood in direction of

the the arrow until position mark on the hood aligns with the red dot

The

hood can be reverse-mounted on the lens for storage.

0 e Part of hood the the picture may be blocked if is not attached properly.

e When attaching

detaching the hood, grasp the base

the hood to turn it.

prevent deformation,

not grasp the rim of hood the to turn it.

Filters

(Sold

Separately)

You

can attach filters to the the filter mounting thread on the front of lens.

O e Only one filter may be attached.

e Use a . polarizing Canon filter (67mm)

adjust the polarizing filter, first remove the lens hood.

Extension

Tubes

(Sold

Separately)

You

can attach extension tube EF12

EF25

for magnified shots. For shooting distance

and magnification, see the extension tube specifications.

Ei!

mode is recommended for accurate focusing .

•

The

extenders cannot be used with this lens.

The

close-up lenses cannot be used with this lens.

cASE

(Sold Separately) LP1116

Produkt Specifikationer

Mærke:	Canon
Kategori:	Linse
Model:	EF 35MM F2 IS USM
Vægt:	335 g
Produktfarve:	Sort
Diameter:	77.9 mm
Forstørrelse:	0.24 x
Længde:	62.6 mm
Nærmeste fokuseringsafstand:	0.24 m
Maksimale blænderåbning tal:	22
Fast brændvidde:	35 mm
Objektivstruktur (elementer/grupper):	10/8
Objektivtype:	Bred linse
Filterstørrelse:	67 mm
Mindste blænderåbnimg tal:	2
Objektivets synsvinkel, diagonal:	63 °
Objektivets synsvinkel, vandret:	38 °
Objektivets synsvinkel, lodret:	54 °