Canon imageFORMULA CR-135i II Manual

Canon Scanner imageFORMULA CR-135i II

Læs gratis den danske manual til Canon imageFORMULA CR-135i II (75 sider) i kategorien Scanner. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Canon imageFORMULA CR-135i II, eller vil du spørge andre brugere om produktet?

Side 1/75
Please read this manual before operating this scanner.
Instructions
2
Connecting the Scanner to a Computer
Connect the CR-135i II/CR-190i II to a computer as follows. Make sure
to install the software before connecting the scanner to a computer.
If you connect the computer and turn ON the CR-135i II/CR-190i II
before installing the software, the following wizard screen appears. If
this happens, click [Cancel], turn OFF the CR-135i II/CR-190i II, and
then install the software.
The following wizard screen is an example in Windows 7. When a
similar wizard screen appears in Windows 8.1/10, click [Cancel].
A Install the software
Install the Scanning Utility for CR-135i/CR-190i. (See “Installing
the Software,” on p. 18.)
B Connect the scanner to a computer
Connect the CR-135i II/CR-190i II and the computer with a USB.
(See “Connecting the Scanner to a Computer,” on p. 19.)
C Turn ON the power
Turn ON the power of the CR-135i II/CR-190i II. (See “Turning ON
the Power,” on p. 20.)
D Automatically installing the device driver
The device driver is installed automatically when Windows
recognizes the CR-135i II/CR-190i II as new hardware. (See
p. 20.)
Wizard Screen (Windows 7)


Produkt Specifikationer

Mærke: Canon
Kategori: Scanner
Model: imageFORMULA CR-135i II

Har du brug for hjælp?

Hvis du har brug for hjælp til Canon imageFORMULA CR-135i II stil et spørgsmål nedenfor, og andre brugere vil svare dig