Canon imageFORMULA CR-50 Manual

Canon Scanner imageFORMULA CR-50

Læs gratis den danske manual til Canon imageFORMULA CR-50 (58 sider) i kategorien Scanner. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Canon imageFORMULA CR-50, eller vil du spørge andre brugere om produktet?

Side 1/58
Please read this manual before operating this scanner.
Instructions
2
Connecting the Scanner to a Computer
Connect the CR-50/80 to a computer as follows. Make sure to install the
software before connecting the scanner to a computer.
If you connect the computer and turn ON the CR-50/80 before
installing the software, the following wizard screen appears. If this
happens, click [Cancel], turn OFF the CR-50/80, and then install the
software.
The following wizard screen is an example in Windows 7. When a
similar wizard screen appears in Windows XP/Vista, click [Cancel].
AInstall the software
Install the Scanning Utility for CR-50/80 in the setup disc provided
with the CR-50/80. (See “Installing the Software,” on p. 19.)
BConnect the scanner to a computer
Connect the CR-50/80 and the computer with a USB. (See
“Connecting the Scanner to a Computer,” on p. 21.)
CTurn ON the power
Turn ON the power of the CR-50/80. (See “Turning ON the
Power,” on p. 22.)
DAutomatically installing the device driver
The device driver is installed automatically when Windows
recognizes the CR-50/80 as new hardware. (See p. 23.)
Wizard Screen (Windows 7)


Produkt Specifikationer

Mærke: Canon
Kategori: Scanner
Model: imageFORMULA CR-50

Har du brug for hjælp?

Hvis du har brug for hjælp til Canon imageFORMULA CR-50 stil et spørgsmål nedenfor, og andre brugere vil svare dig