Canon LM-V1 Manual

Canon Ikke kategoriseret LM-V1

Læs gratis den danske manual til Canon LM-V1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Canon LM-V1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

MONITORING

Monitoring

LM-V1 / LM-V2 LCD Monitor

Connect the LCD monitor to the camera to add a large monitoring screen with touch screen operations

(touch to focus), menu operation buttons and joystick and two assignable buttons.

For details on how to attach and use the LCD monitor, see the instruction manual of the camera being

used.

An optional attachment unit is also required to attach the monitor to the camera.

Names of Parts

1 LCD panel with touch screen

2 FUNC (main functions) button / Assignable

button LCD LM-V1/V2 1

3MENU button

4Joystick

5 MIRROR (invert the displayed image) button

6CANCEL button

7 DISP (display) button / Assignable button LCD

LM-V1/V2 2

8 LCD monitor’s position alignment mark Í

9 Screw holes for 1/4"-20 screws (11.2 mm

(0.44 in.) deep, x2)

10 VIDEO terminal

VIDEO terminal

UN-5 / UN-10 Unit Cable (optional)

MONITORING

Attaching the LCD Monitor



About the LCD Attachment Unit

Use the optional LA-V1 or LA-V2 LCD Attachment Unit to attach the LCD monitor to the handle unit or to

the camera’s body itself. For details see the instruction manual of the camera being used.



Attaching the LCD Monitor to the Handle Unit

1. Turn off the camera.

2. On the LCD attachment unit, rotate the LCD

monitor mount in the direction of the locking knob

to make the LCD monitor fixation bolt accessible.

3. Attach the LCD monitor to the LCD monitor mount.

• Align the Í marks on the monitor and monitor

mount. If necessary, you can also mount the LCD

monitor facing the other way around.

• Tighten the LCD monitor fixation bolt using the hex

wrench for 0.64 cm, 1/4" screws.

4. Attach the LCD attachment unit to the handle unit.

• Align the attachment mount on the LCD attachment

unit to the handle unit’s front accessory mount.

• Tighten the locking knob firmly.

5. Rotate the LCD monitor 90 degrees toward the

handle unit.

6. Connect the LCD monitor to the camera’s VIDEO

terminal using the UN-5 Unit Cable.

• Align the Í marks on the cable’s plugs and

terminals.

7. Put the cable though the LCD attachment unit’s

cable clamp.

• If necessary, adjust the position of the cable so that

it does not get in the picture or obstruct the view.

LCD Monitor

LM-V1 LM-V2

LCD Attachment Unit

LA-V1 N —

LA-V2 — N

햴

햳

햶

햵

햸

햷

Produkt Specifikationer

Mærke:	Canon
Kategori:	Ikke kategoriseret
Model:	LM-V1
Bredde:	120 mm
Dybde:	37 mm
Højde:	75 mm
Vægt:	185 g
Produktfarve:	Sort
Skærm diagonal:	4 "
Skærmopløsning:	- pixel
Berøringsskærm:	Ingen
Skærmteknologi:	LCD
Strømforsyningstype:	Batteri
Kompatible produkter:	Canon C200 / C300 Mk II