www.CarnivalKingSupplies.com
||||| info@carnivalking.com
General Safety Precautions
To ensure safe operation, read the following statements carefully.
These precautions should be followed at all times. Failure to follow these precautions could result in injury.
To reduce risk of injury or damage to the unit:
1. Do not operate unattended.
2. Unit must be only used in a flat, level position.
3. This machine must not be operated by anyone under the age of 18.
4. This machine must be connected to grounded socket
5. Unplug unit and turn off before cleaning or moving.
6. Do not spray controls or outside of unit with liquids or cleaning agents.
7. Do not operate if unit has been damaged or is malfunctioning in any way.
8. This unit has sharp cutting blades, be very careful when cleaning.
9. Do not spray controls or outside of unit with liquids or cleaning agents.
10. Do not clean the unit with steel wool.
11. When not in use, do not leave the machine running for more than 60 minutes.
INSTALLATION AND OPERATION INSTRUCTIONS
1. Locate the Ice crusher in a place where it cannot be pushed off counter.
2. Keep the area at the front of the Ice crusher clear for unobstructed access during operation.
3. Keep unit and power cord away from open flames, electric burners or excessive heat.
4. Use only grounded electrical outlets matching the nameplate rated voltage.
5. Do not use an extension cord with this equipment.
6. Do not spray controls or outside of unit with liquids or cleaning agents.
Sno Cone Machine Specs Parts List
Overall Dimensions 16.5”W x 25”H x 13.5”D
Cabinet Dimensions 16.5”W x 14.5”H x 13.5”D
382SCMDHOSE Drain Hose, 24"
382SCMPLUG Cord and Plug Set, 4'
This unit is intended to be used for crushing ice in commercial foodservice operations only. It is not intended for
household, industrial or laboratory use.
Before using this equipment it must be cleaned and dried thoroughly. Clean all surfaces before use. Failure to clean
surfaces before using the unit could cause food contamination.
This Ice crusher is intended for crushing ice cubes for use in beverages, ice cubes should be a maximum of 2 inches
in diameter. Larger pieces should be broken up before processing through the machine.
