Carson 3D Series TD-042 Manual

Carson Kikkert 3D Series TD-042

Læs gratis den danske manual til Carson 3D Series TD-042 (2 sider) i kategorien Kikkert. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Carson 3D Series TD-042, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

system.

ve (fron o

s a slim,

sms

f view.

CARSON®

3DSeries

Binoculars

TD-832

TD-842

TD-042

TD-050

Congratulations on selecting your new 3D Series Binocular! In order to achieve optimum

performance, please follow instructions for proper use and care.

PRODUCT SPECIFICATION:

Model

Magniÿcation

TD-832

TD-842

TD-042

10x

TD-050

10x

Objective Lens Diameter 32mm 42mm 42mm 50mm

Prism BAK-4 BAK-4 BAK-4 BAK-4

Lens Coating

Fully

Multi-Coated

Fully

Multi-Coated

Fully

Multi-Coated

Fully

Multi-Coated

Field of View 392 feet 341 feet 314 feet 262 feet

Eye Relief 19.5mm 19.5mm 16mm 20mm

Close Focus 6.6 feet 9.8 feet 9.8 feet 13.1 feet

O-Ring Sealed Yes Yes Yes Yes

Phase Coated Yes Yes Yes Yes

Waterproof / Fogproof Yes Yes Yes Yes

ED Glass Objective Lens No No No No

Weight 1.2 lbs. 1.4 lbs. 1.5 lbs. 1.7 lbs.

Dimensions 4.9" x 4.8" x 1.8" 5.5" x 5" x 2" 5.5" x 5" x 2" 6.8" x 5.3" x 2.5"

PRISM SYSTEM:

Your Carson 3D binoculars

feature a roof prism system.

The prisms overlap closely

allowing the objective

(front) lenses to line up

directly with the eyepieces.

The result is a slim,

streamlined shape in which

the lenses and prisms that

magnify and correct the

image are in a straight line.

objective lens

eyepiece

t) lenses t

EYE ADJUSTMENTS: HOW TO ADJUST FOR DISTANCE BETWEEN YOUR EYES

The distance between the eyes, called “interpupillary distance,” varies from person to person. To achieve perfect alignment

of lens to eye, follow these simple steps:

1. Hold your binoculars in the normal viewing

position.

2. Grasp each barrel rmly. Move barrels

closer together or further apart until you see

a singular circular eld. Always reset your

binoculars to this position before using.

FOCUSING YOUR BINOCULARS:

Carson 3D binoculars have a center focus wheel and

an independent right diopter eyepiece to account for

small dierences in the strength of each eye. Please

follow the steps below to focus properly:

1. Adjust the interpupillar distance.

2. Rotate the right eyepiece to its index mark

and sight on a xed distant object.

3. Cover the right objective (front) lens with

your hand, then rotate the central focusing

wheel until the image in the left eyepiece is

sharp.

4. Cover the left objective (front) lens with your

hand then rotate the right eyepeice until the

image is sharp. (Note this setting for future

use.)

5. Image should now be focused to your

individual eyestrength.

TWIST-UP EYECUPS:

Your Carson 3D binocular features twist-up eyecups

designed to exclude extraneous light. If you do not

wear eyeglasses, you may choose to twist the

eyecups out to block stray light and reections from

your view. If you are an eyeglass wearer, lowering the

eyecups will bring your eyes closer to the binocular

lenses, providing an improved eld of view.

twist-adjust

adjustable

right diopter

(eyepiece)

eyecups

central

focusing wheel

WATERPROOFING:

All Carson 3D binoculars are nitrogen purged and o-ring

sealed to protect your binocular from water damage. They

are designed to protect against accidental splashing, rain

or even full submersion in up to 1 meter of water for up to

5 minutes.

OPTICAL COATINGS:

All 3D binoculars featuer fully multi-coated optics, meaning

that all glass surfaces have multiple coatings applied to them

to prevent internal reection and light loss. This results in

images that are brighter, shaper and higher in contrast.

As light travels through a roof prism binocular, it becomes

slightly out of phase. This aects the color balance and

delity. Your 3D binoculars are phase coated to correct this

problem, forcing the light back into phase and therefore

resulting in more accurate color reproduction.

All 3D binoculars come with both a neck strap and a shoulder harness. You can choose either accessory to hold your binocular

depending on your personal preference.

ATTACHING THE NECK STRAP:

1. Thread the end of the strap up through the strap clip on

the side of your binocular.

2. Thread the strap through the rst loop of the plastic

strap piece.

3. Continue to thread the strap through the second loop of

the plastic strap piece.

4. Adjust the strap to the desired length and pull tight.

5. Slide the plastic cu over the loose end of the neck

strap.

ATTACHING THE SHOULDER HARNESS:

1. Remove the security buttons from the quick release hooks

on your binocular harness.

2. Slide the security button loop upward through the strap

clips on each side of your binocular.

3. Feed the security button through the loop and tighten.

4. Attach quick release hook onto loop.

5. Slide security button into center of quick release hook.

1 2 3

4 5

USE OF A TRIPOD ADAPTER:

All Carson 3D binoculars are compatible with most

standard binocular tripod adapters. To attach a tripod

adapter to your binoculars:

1. Twist the tripod adapter cap (located at the hinge in

between the binocular barrels) counterclockwise and

remove it.

2. Attach the binocular tripod adapter into the threaded

hole in the binocular turning it clockwise until tight.

3. Attach the bottom of the tripod adapter to your tripod.

NOTE: Tripod and adapter are not included with your

3D binoculars.

ripod and adapt e not included with y

1 2 3

INSTRUCTIONS FOR CARE:

Cleaning must be done safely to avoid scratching the

lenses. This can be accomplished with the following

procedure:

1. Blow away any dust or debris on the lens (or use a soft

brush.)

2. To remove dirt, grease or ngerprints, clean with a soft

cotton cloth, rubbing in a circular motion. Use of a

coarse cloth or unnecessary rubbing may scratch the

lens surface and eventually cause permanent damage.

3. For a more thorough cleaning, use a Carson C6® lens

cleaning product.

4. IMPORTANT: Never attempt to clean your binoculars

internally or try to take them apart.

5. Keep binoculars in case when not in use.

Customer Service:

If you experience any diculties, please contact us and we will be happy to help you.

In the U.S.A.

Phone: 1-631-963-5000

Email: info@carson.com

In the U.K.

Phone: +44 (0) 1938 557440

Email: uksupport@carson.com

In the E.U.

Phone: +44 (0) 1938 557440

Email: eusupport@carson.com

For warranty information, visit www.carson.com/warranty

Produkt Specifikationer

Mærke:	Carson
Kategori:	Kikkert
Model:	3D Series TD-042

Har du brug for hjælp?

Hvis du har brug for hjælp til Carson 3D Series TD-042 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kikkert Carson Manualer

Carson OperaView Manual

3 August 2025

Carson AdventurePak HU-401 Manual

8 September 2024

Carson HookUpz IB-700 Manual

3 September 2024

Carson Makalu Manual

22 August 2024

Carson JD-718 Manual

9 August 2024

Carson JD-025 Manual

1 August 2024

Carson 3D Series TD-832 Manual

30 Juli 2024

Carson 3D Series TD-042EDMO Manual

29 Juli 2024

Carson TF-025 Manual

26 Juli 2024

Carson JD-822 Manual

24 Juli 2024

Kikkert Manualer

Nyeste Kikkert Manualer

Olympus 8×40 DPS I Manual

12 August 2025

Levenhuk Vegas ED 12x50 Manual

5 August 2025

Bushnell Match Pro Manual

2 August 2025

Nikon 8x30 EII Manual

2 August 2025

Swarovski AX Visio Manual

31 Juli 2025

Zeiss Victory SF 10x42 Manual

31 Juli 2025

Zeiss Victory SF 8x42 Manual

31 Juli 2025

Pentax UP 10x21 Manual

23 Juli 2025

Levenhuk Nitro ED 10x50 Manual

23 Juli 2025

Levenhuk Nitro ED 10x42 Manual

22 Juli 2025