Casio 3267 Manual
Læs nedenfor 📖 manual på dansk for Casio 3267 (5 sider) i kategorien Ur. Denne guide var nyttig for 48 personer og blev bedømt med 5.0 stjerner i gennemsnit af 24.5 brugere
Side 1/5
Operation Guide 3267 3400
MO1207-EA © 2012 CASIO COMPUTER CO., LTD.
E-1
About This Manual
•Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
•Button operations are indicated using the letters shown
in the illustration.
•Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E-2
•Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatch .............................................................................................................. E-12
Recall Mode ........................................................................................................... E-21
Countdown Timer .................................................................................................. E-25
Alarms .................................................................................................................... E-29
Dual Time ............................................................................................................... E-36
Illumination ............................................................................................................ E-38
Reference .............................................................................................................. E-42
Specifications ....................................................................................................... E-47
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-8
To toggle between 12-hour and 24-hour timekeeping ....................................... E-10
To toggle the Timekeeping Mode between DST and
Standard Time .................................................................................................. E-11
To measure elapsed time ..................................................................................... E-15
To measure elapsed time with lap times ............................................................ E-15
To measure elapsed time with split times .......................................................... E-17
To time first and second place finishes .............................................................. E-18
To recall stopwatch time records ........................................................................E-22
To delete a log ....................................................................................................... E-24
E-5
To use the countdown timer ................................................................................E-26
To configure countdown start time and auto-repeat settings .......................... E-27
To set an alarm time ............................................................................................. E-31
To test the alarm ................................................................................................... E-33
To select the operation of Alarm
1
...................................................................... E-34
To turn Alarms
2
and
3
on and off ..................................................................... E-35
To turn the hourly time signal on and off ........................................................... E-35
To set the Dual Time ............................................................................................. E-36
To illuminate the display manually ...................................................................... E-38
To specify the illumination duration ................................................................... E-39
To turn the auto light switch on and off .............................................................. E-41
To turn the button operation tone on and off ..................................................... E-43
E-6
General Guide
•Press C to change from mode to mode.
•In any mode (except when a setting screen is on the display), press B to illuminate
the face of the watch.
Timekeeping Mode
Press .C
Stopwatch Mode
▲
▲
E-7
Dual Time Mode
Countdown Timer Mode
Alarm Mode
Recall Mode
▲
▲
▲
▲
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Hour Minutes
Year
DST
Day Month
Seconds
PM indicator
Minutes
Seconds
Month – DayDay of week
Hours
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Seconds E-9
3. When the setting you want to change is flashing, use D B and to change it as
described below.
Screen: To do this:
Reset the seconds to 00
Toggle between Daylight Saving
Time ( ON) and Standard Time (OF)
Change the hour or minutes
Change the year
Change the month or day
Do this:
Press D.
Press D.
Use D (+) and B (–).
Use D (+) and B (–).
4. Press A to exit the setting screen.
•The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
•See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
Operation Guide 3267 3400
E-10
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-
hour timekeeping.
•With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and the A (AM) indicator appears to the left
of the hour digits for times in the range of midnight to 11:59 a.m.
•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
•The A and P indicators are not displayed with the Timekeeping Mode time on the
Countdown Timer Mode and Dual Time Mode screens.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-11
To toggle the Timekeeping Mode between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press once and the DST setting screen appears.C
3. Press D to toggle between Daylight Saving Time (ON
displayed) and Standard Time (OF displayed).
4. Press A to exit the setting screen.
•The DST indicator appears on the Timekeeping and
Alarm Mode screens to indicate that Daylight Saving
Time is turned on.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
DST indicator
On/Off status
E-12
Stopwatch
The stopwatch lets you measure elapsed time, lap times,
split times, and two finishes. Lap times and split times can
be stored in memory.
•The display range of the stopwatch is 99 hours,
59 minutes, 59 seconds.
•All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C (page
E-6).
Note
•“Lap time” is the time spent to cover a specific segment
of a race, such as one lap around a track. “Split time” is
the time spent from the beginning of a race up to a
certain point.
•The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
Minutes Seconds
1/100
second
Hours
Remaining
free records
E-13
•The stopwatch measurement operation continues even if you exit the Stopwatch
Mode.
•For information about how stopwatch times are stored in memory, see “Memory
Management” (page E-19).
Viewing the Stopwatch Displays
The information that appears in the watch’s upper and lower displays depends on
whether you are measuring lap times or split times.
Lap Time Measurement
Upper Display: Lap time
Lower Display: Elapsed time
Split Time Measurement
Upper Display: Lap time
Lower Display: Elapsed time (Split time appears here for eight seconds as it is stored
in memory.)
•See “To measure elapsed time with lap times” (page E-15) and “To measure elapsed
time with split times” (page E-17) for more information about each type of measurement.
E-14
•You can perform elapsed time measurement starting from either the lap time screen
or the split time screen (page E-15 and E-17). Whenever you enter the Stopwatch
Mode, the screen (lap time or split time) that was displayed when you last exited the
mode will appear first.
•During a stopwatch elapsed time operation, the upper display initially shows
minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and
seconds when the time in the upper display exceeds 60 minutes.
•The lower display initially shows hours, minutes, seconds, and a 1/100-second
value. This changes to hours, minutes, and seconds when the time in the lower
display exceeds 10 hours.
▲
▲
More than 10 hours
More than one hour
Minutes
Seconds
1/100 second Hours
Minutes
Seconds
Hours
Minutes
Seconds
1/100 second
Hours
Minutes
Seconds
E-15
To measure elapsed time
Note
•You can perform the following steps starting from either the lap time screen or the
split time screen.
1. Press D to start the stopwatch.
2. Press D again to stop the stopwatch.
•You can resume the measurement operation by pressing D.
3. Press A to clear the stopwatch to all zeros.
To measure elapsed time with lap times
1. When the stopwatch display shows all zeros, press
A to display the lap time screen (indicated by LAP/).
2. Press D to start an elapsed time measurement.
•At the time, both the upper and lower displays will
show identical times.
3. Press A to record the time of the first lap.
E-16
•This freezes the current lap time in the upper part of
the display for about eight seconds, while
measurement of total elapsed time and the next lap
time continue internally. The lap number of the
displayed time appears in the lower display.
•After eight seconds, the ongoing elapsed time
measurement re-appears in the lower display.
4. Repeat step 3 to record more lap times.
5. Press D to stop the stopwatch.
6. Press A to clear the stopwatch to all zeros.
•Lap numbers are incremented automatically starting
from whenever you press in step 3 of the above1A
procedure. The maximum lap number is . Recording99
a lap after that causes the lap number count to restart
from .00
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Lap number
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Elapsed time
Lap time
Lap time
E-17
To measure elapsed time with split times
1. When the stopwatch display shows all zeros, press A
to display the split time screen (indicated by SPL/ ).
2. Press D to start an elapsed time measurement.
•At the time, both the upper and lower displays will
show identical times.
3. Press A to record the time of the first split.
•The current split time appears in the lower display for
about eight seconds, as the total elapsed time, next
lap time, and next split time continue to be timed
internally by the watch. The split number of the
displayed time appears in the upper display.
•After eight seconds, the ongoing lap time
measurement appears in the upper display and the
ongoing elapsed time measurement appears in the
lower display.
4. Repeat step 3 to record more split times.
5. Press D to stop the stopwatch.
6. Press A to clear the stopwatch to all zeros.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Split time
Split number
Split Time Recording
(Displayed for eight seconds
after A is pressed.)
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Lap time
Elapsed time
E-18
•Split numbers are incremented automatically starting from 1 whenever you press A
in step 3 of the above procedure. The maximum split number is . Recording a split99
time after that causes the split number count to restart from 00.
To time first and second place finishes
1. When the stopwatch display shows all zeros, press A to display the split time
screen (indicated by SPL/ ).
2. Press D to start a time measurement.
3. Press A when the first finisher crosses the finish line.
•This freezes the time of the first finisher in the lower part of the display for about
eight seconds. After that, the display returns to elapsed time measurement.
4. Press D when the second finisher crosses the finish line.
•The second finisher’s time will appear in the lower display.
•The difference between the first finisher’s and the second finisher’s time will
appear in the upper display.
5. Press A to clear the stopwatch to all zeros.
E-19
Memory Management
A new log is created each time you press in the Stopwatch Mode to start a newD
elapsed time measurement operation. A log contains a log title screen, and records of
all the lap or split times you record during the current elapsed time measurement
operation.
•The capacity of the watch’s memory is 60 records.
•If you are adding records to the only log in memory and watch memory becomes
full, adding another record causes the oldest record in the log to be deleted
automatically to make room for the new record.
•If you are adding records to a log when there are multiple logs in memory and watch
memory becomes full, adding another record causes the oldest log in memory and
all of its records to be deleted automatically to make room for new records.
Produkt Specifikationer
| Mærke: | Casio |
| Kategori: | Ur |
| Model: | 3267 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio 3267 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ur Casio Manualer
7 April 2025
7 April 2025
30 Marts 2025
22 December 2024
22 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
Ur Manualer
- Ur Karlsson
- Ur BML
- Ur Nite
- Ur Iron Annie
- Ur Emos
- Ur TW Steel
- Ur Just
- Ur Diesel
- Ur Balance Time
- Ur Wonky Monkey
- Ur Freestyle
- Ur Grand Seiko
- Ur Invicta
- Ur Meister Anker
- Ur ART
Nyeste Ur Manualer
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025