Casio Baby-G MSG-S200 Manual

Casio Ur Baby-G MSG-S200

Læs gratis den danske manual til Casio Baby-G MSG-S200 (8 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Casio Baby-G MSG-S200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Operation Guide 5576

E-9

Charging the Watch

The face of the watch is a solar panel that generates power from light. The generated

power charges a built-in rechargeable battery, which powers watch operations. The

watch charges whenever it is exposed to light.

Charging Guide

Whenever you are not

wearing the watch, leave it

in a location where it is

exposed to light.

• Best charging

performance is achieved

by exposing the watch to

the strongest light

available.

When wearing the watch,

make sure that its face is

not blocked from light by the

sleeve of your clothing.

• The watch may enter a

sleep state (page E-16) if its

face is blocked by your

sleeve even only partially.

E-8

Hand Home Position Adjustment …………………………………………………E-45

To adjust home positions ………………………………………………………E-45

Other Settings …………………………………………………………………………E-47

To enable or disable the button operation tone ……………………………E-47

To enable or disable Power Saving …………………………………………E-49

Troubleshooting ………………………………………………………………………E-50

Specifications …………………………………………………………………………E-53

Operating Precautions ………………………………………………………………E-55

User Maintenance ……………………………………………………………………E-66

E-7

Using the Stopwatch …………………………………………………………………E-38

To enter the Stopwatch Mode …………………………………………………E-38

To perform an elapsed time operation ………………………………………E-39

To measure split times …………………………………………………………E-39

To measure two finishes ………………………………………………………E-40

Using the Alarm ………………………………………………………………………E-41

To enter the Alarm Mode ………………………………………………………E-41

To set the alarm time ……………………………………………………………E-42

To turn the alarm on or off ……………………………………………………E-43

To stop a sounding alarm ………………………………………………………E-43

To turn the hourly time signal on or off ………………………………………E-43

Illumination ……………………………………………………………………………E-44

To turn on illumination …………………………………………………………E-44

E-6

Configuring Current Time and Date Settings ……………………………………E-27

To change the current time and date settings ………………………………E-27

Using the World Time Mode …………………………………………………………E-31

To enter the World Time Mode ………………………………………………E-31

To view the time in another city ………………………………………………E-32

To specify standard time or daylight saving time (DST) for a city …………E-32

To swap your Home Time and World Time Cities …………………………E-34

Using the Countdown Timer …………………………………………………………E-35

To enter the Countdown Timer Mode …………………………………………E-35

To specify the countdown start time …………………………………………E-35

To perform a countdown timer operation ……………………………………E-37

To stop the alarm ………………………………………………………………E-37

E-5

Contents

About This Manual …………………………………………………………………… E-1

Things to check before using the watch ………………………………………… E-2

Charging the Watch …………………………………………………………………… E-9

To recover from the sleep state ………………………………………………E-17

Mode Reference Guide ………………………………………………………………E-18

Timekeeping ……………………………………………………………………………E-23

Configuring Home City Settings ……………………………………………………E-24

To configure Home City settings ………………………………………………E-24

To change the Daylight Saving Time (summer time) setting ………………E-25

E-4

2. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To configure Home City settings” (page E-24) to configure your

Home City and daylight saving time settings.

Important!

• Proper World Time Mode data depend on correct Home City, time, and date

settings in the Timekeeping Mode. Make sure you configure these settings

correctly.

3. Set the current time.

See “Configuring Current Time and Date Settings” (page E-27).

The watch is now ready for use.

E-3

Go to step 2.

The watch is charged.

For details about charging, see “Charging the Watch” (page E-9).

Power is low.

Charge the watch by placing it in a location where it is exposed to

light. For details, see “Charging the Watch” (page E-9).

E-2

MID

indicated as the battery power indicator (page E-12)?

Battery power indicator

YES

Things to check before using the watch

1. Check the battery power level.

In the Timekeeping Mode, press

to display the battery power indicator.

E-1

About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All examples in this

manual are shown using dark figures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

ENGLISH

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is

designed, carefully read and follow the instructions in this manual, especially the

information under “Operating Precautions” and “User Maintenance”.

Operation Guide 5576

E-19

To do this: Enter this mode: See:

Use the countdown timer Countdown Timer Mode E-35

Use the stopwatch to measure elapsed time Stopwatch Mode E-38

• Set an alarm time

• Turn an alarm or the hourly time signal ON or OFF

Alarm Mode

E-41

E-18

Mode Reference Guide

Your watch has six modes. The mode you should select depends on what you want to

do.

To do this: Enter this mode: See:

• View the current date in the Home City

• Configure Home City and daylight saving time (DST)

settings

• Configure time and date settings

• Switch between 12-hour and 24-hour timekeeping

Timekeeping Mode

E-23

Check the battery power indicator Battery Mode E-11

View the current time in one of 48 cities (31 time zones)

around the globe

World Time Mode E-31

E-17

• The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch is

already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep

state.

• The watch will not enter a sleep state while it is in the Countdown Timer Mode or

Stopwatch Mode.

To recover from the sleep state

Move the watch to a well-lit area or press any button.

E-16

• For details about the operating time and daily operating conditions, see the “Power

Supply” (page E-54) section of the Specifications.

Power Saving

When enabled, Power Saving enters a sleep state automatically whenever the watch

is left for a certain period in an area where it is dark. The table below shows how

watch functions are affected by Power Saving.

• For information about enabling and disabling power saving, see “To enable or

disable Power Saving” (page E-49).

• There actually are two sleep state levels: “display sleep” and “function sleep”.

Elapsed Time in Dark Digital Displays Operation

60 to 70 minutes (display sleep) Blank

All functions enabled, except for the

display

6 or 7 days (function sleep) Blank

• Beeper tone, illumination, and display

disabled

• Analog timekeeping stopped at

12 o’clock

E-15

Charging Times

Exposure Level

(Brightness)

Daily

Operation

Level Change *2

Level 5 Level 4 Level 3 Level 2 Level 1

Outdoor sunlight

(50,000 lux)

8 min. 4 hours 38 hours 10 hours

Window sunlight

(10,000 lux)

30 min. 11 hours

142 hours

38 hours

Window sunlight on

cloudy day (5,000 lux)

48 min. 17 hours

230 hours

62 hours

Indoor fluorescent

lighting (500 lux)

8 hours 218 hours – – – – – –

*1 Approximate exposure each day to generate power for normal daily operation.

*2 Approximate exposure time (in hours) required to take power up one level.

• The above exposure times all are for reference only. Actual exposure times depend

on lighting conditions.

E-14

Recover Mode

• Performing illumination, or beeper operations during a

short period may cause

(Recover) to appear on the

display.

After some time, battery power will recover and

(Recover) will disappear, indicating that the above

functions are enabled again.

• If

(Recover) appears frequently, it probably means

that remaining battery power is low. Leave the watch in

bright light to allow it to charge.

Recover indicator

E-13

• The flashing charge alert at Level 3 and the flashing charge alert (

) at Level

4 tell you that battery power is very low, and that exposure to bright light for

charging is required as soon as possible.

• At Level 5, all functions are disabled and settings return to their initial factory

defaults. Once the battery reaches Level 2 after falling to Level 5, reconfigure the

current time, date, and other settings.

• The watch’s Home City code setting will change automatically to

TYO

(Tokyo)

whenever the battery drops to Level 5. If you are using the watch in North America

or Europe, or China you will need to change the Home City code setting to match

your location after the battery drops to Level 5.

• Display indicators reappear as soon as the battery is charged from Level 5 to Level

• Leaving the watch exposed to direct sunlight or some other very strong light source

can cause the battery power indicator to show a reading temporarily that is higher

than the actual battery level. The correct battery level should be indicated after a

few minutes.

E-12

Level Battery Power Indicator Function Status

(HI)

All functions enabled.

(MID)

All functions enabled.

(LO)

(Charge Alert)

flashes and functions below disabled.

• Display illumination.

• Sound (alarms, etc.)

• Non-Timekeeping Mode functions

(C)

(Charge Alert)

Hands stopped at 12 o’clock. Only

displayed.

All functions, including timekeeping,disabled and

initialized.

and

appear in the Timekeeping Mode to indicate the battery status.

E-11

Power Levels

In the Timekeeping Mode, press

to display the battery power indicator.

Battery power indicator

E-10

Warning!

Leaving the watch in bright light for charging can cause it to become quite hot.

Take care when handling the watch to avoid burn injury. The watch can become

particularly hot when exposed to the conditions below for long periods.

• On the dashboard of a car parked in direct sunlight

• Too close to an incandescent lamp

• Under direct sunlight

Important!

• Allowing the watch to become very hot can cause the digital display to black out.

The appearance of the LCD should become normal again when the watch returns

to a lower temperature.

• Enable the watch’s Power Saving function (page E-16) and keep it in an area normally

exposed to bright light when storing it for long periods. This helps to ensure that

power does not run down.

• Storing the watch for long periods in an area where there is no light or wearing it in

such a way that it is blocked from exposure to light can cause power to run down.

Expose the watch to bright light whenever possible.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Baby-G MSG-S200

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Baby-G MSG-S200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025