Casio Collection A500WEA-1EF Manual
Læs nedenfor 📖 manual på dansk for Casio Collection A500WEA-1EF (5 sider) i kategorien Ur. Denne guide var nyttig for 17 personer og blev bedømt med 4.7 stjerner i gennemsnit af 9 brugere
Side 1/5
Operation Guide 3437
E-9
Screen To do this: Do this:
Reset the seconds to . Press .D
Toggle between Daylight Saving
Time ( ) and Standard Time ( ). Press .D
Change the city code. Use (east) and (west).D B
Change the hour or minutes. Use (+) and (–).D B
Toggle between 12-hour ( ) and
24-hour ( ) timekeeping. Press .D
Change the year. Use (+) and (–).D B
Change the month or day. Use (+) and (–).D B
Toggle the setting between
1.5 seconds ( ) and 3 seconds ( ). Press .D
x
See “Daylight Saving Time (DST)” on page E-10 for details about DST setting.
E-8
Changing the Current Home City Time and Date Settings
1. Use to display the current Home City Time (T-1) D
screen.
2. Hold down until the seconds start to fl ash, which A
indicates the setting screen.
3. Press to move the fl ashing in the sequence shown C
below to select other settings.
Seconds
YearDay
Illumination
Duration C C
C
Minutes
12/24-Hour
Format
C
C
Month
C
HourDST
C C C
City Code
C
4. When the setting you want to change is fl ashing, use and to change it as D B
described below.
E-7
Switching Between Time Screens
Each press of cycles the time screens in the sequence shown below.D
Displayed for one second.
x
You can change the current time setting for your Home City Time (T-1) only.
x
For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting.
E-6
Timekeeping
The Timekeeping Mode’s Multi Time feature gives you
quick and easy access to the current time and date in four
different cities, numbered from T-1 (Time 1) through T-4
(Time 4). T-1 is your Home City Time, and T-2, T-3, and
T-4 are Local Times. Local Times are kept in
synchronization with your Home City Time (T-1).
Month – Day
Map
Day of week
PM indicator
Hour : Minutes Seconds
E-5
C C
C
Alarm Mode Countdown Timer
Mode
Stopwatch Mode
E-4
General Guide
x Press to change from mode to mode.C
x
In any mode (except when a setting screen is on the display), press to illuminate B
the display.
C
Timekeeping Mode World Time Mode
C
E-3
To turn an alarm on and off .................................................................................. E-22
To turn the Hourly Time Signal on and off .......................................................... E-23
To confi gure the countdown timer ......................................................................E-25
To use the countdown timer ................................................................................. E-26
To measure times with the stopwatch ................................................................. E-28
To turn the button operation tone on and off ..................................................... E-31
To turn off Auto Display ........................................................................................ E-34
To turn on Auto Display ........................................................................................ E-34
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-11
To turn on illumination .......................................................................................... E-14
To view the time for another city code ................................................................ E-15
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-16
To change your Home Time city to the current World Time city ...................... E-17
To set an alarm time .............................................................................................. E-19
To test the alarm .................................................................................................... E-21
E-1
Contents
General Guide ..........................................................................................................E-4
Timekeeping .............................................................................................................E-6
World Time ............................................................................................................. E-15
Alarms .................................................................................................................... E-18
Countdown Timer ..................................................................................................E-24
Stopwatch .............................................................................................................. E-27
Reference ............................................................................................................... E-29
Specifi cations ........................................................................................................E-35
E
About This Manual
x
Button operations are indicated using the letters shown
in the illustration.
x
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MA1408-EA © 2014 CASIO COMPUTER CO., LTD.
Operation Guide 3437
E-19
To set an alarm time
1. In the Alarm Mode, use to scroll through the alarm D
screens until the alarm number you want to set is
displayed.
D D
D D
D D
2. After you select an alarm, hold down until the hour setting of the alarm time A
starts to fl ash, which indicates the setting screen.
x
This operation turns on the One-time Alarm automatically.
E-18
Alarms
Your watch has a total of fi ve alarms, each of which you
can confi gure as a daily alarm or one-time alarm.
x
Daily Alarm: Sounds at the preset time each day.
x
One-time Alarm: Sounds once at the preset time and then
is disabled automatically.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
x
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing (page E-5).C
x
Alarms operate in coordination with the current Home
City Time.
Alarm on indicator
Alarm number
Alarm time
(Hour : Minutes)
E-17
To change your Home Time city to the current World Time city
1. In the World Time Mode, use to display the city you want to make your new D
Home Time city.
2. Press and at the same time.A B
x
This makes the World Time city you selected in step 1 your new Home Time city.
E-16
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use (east) to display the city D
code (time zone) whose Standard Time/Daylight Saving
Time setting you want to change.
2. Hold down for about one second to toggle Daylight A
Saving Time ( displayed) and Standard Time ( DST DST
not displayed).
x
The indicator is on the display whenever you display DST
a city code for which Daylight Saving Time is turned on.
x
Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
x
Note that you cannot switch between Standard Time
and Daylight Saving Time while UTC is selected as the
city code.
DST indicator
E-15
World Time
World Time shows the current time in 48 cities (31 time
zones) around the world.
x
All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-4).
To view the time for another city code
In the World Time Mode, press to scroll eastwardly D
through city codes.
x
For full information about city codes, see the “City Code
Table” at the back of this manual.
x
If the current time for a city is wrong, check your
Timekeeping Mode time and time zone settings and
make the necessary changes.
City code
Current time and date in
the zone of the selected
city code
E-14
To turn on illumination
In any mode (except when a setting screen is on the display), press to turn on B
illumination.
x
You can use the procedure above to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press , the illumination will remain on for about B
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
E-13
Changing Your Home City Time
Use the following procedure to change your current Home City Time to any one of the
three Local Times.
1. In the Timekeeping Mode, press to display the Local Time which you want to D
make your Home City Time.
2. Press and at the same time.A B
x
This makes the Local Time you selected in step 1 your new Home City Time.
Illumination
An LED (light-emitting diode) illuminate the display for easy reading in the dark.
Illumination Precautions
x
The illumination provided by the light may be hard to see when viewed under direct
sunlight.
x
Illumination automatically turns off whenever an alarm sounds.
x
Frequent use of illumination runs down the battery.
E-12
12/24-Hour Format
x
With the 12-hour format, the indicator appears for times in the range of noon to PM
11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m.
x
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Changing the City Setting of a Local Time
You can select any one of the city codes in the table at the back of this manual as a
Local Time city.
1. Display the Local Time whose city setting you want to change, and then hold down
A for about two seconds until the current city code starts to fl ash.
2. Use (east) and (west) to select the city code you want.D B
3. Press to display the DST setting screen.C
4. Press to toggle between Daylight Saving Time (D displayed) and Standard
Time ( displayed).
5. After the settings are the way you want, press .A
E-11
To toggle the Timekeeping Mode time between DST and Standard Time
1. Use to display the current Home City Time (T-1) D
screen.
2. Hold down until the seconds start to fl ash, which A
indicates the setting screen.
3. Press to display the DST setting screen.C
4. Press to toggle between Daylight Saving Time (D
displayed) and Standard Time ( displayed).
5. Press to exit the setting screen.A
x
The indicator appears on the Timekeeping screen to DST
indicate that Daylight Saving Time is turned on.
DST indicator
E-10
5. Press to exit the setting screen.A
x
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
Produkt Specifikationer
| Mærke: | Casio |
| Kategori: | Ur |
| Model: | Collection A500WEA-1EF |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio Collection A500WEA-1EF stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ur Casio Manualer
7 April 2025
7 April 2025
30 Marts 2025
22 December 2024
22 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
Ur Manualer
- Ur Nite
- Ur Audiovox
- Ur Ecom
- Ur Hermle
- Ur Zeppelin
- Ur TW Steel
- Ur Eta
- Ur Torgoen
- Ur Lambretta
- Ur RCA
- Ur Pyle
- Ur Detomaso
- Ur Brera
- Ur Executive
- Ur Medion
Nyeste Ur Manualer
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025