Casio LW-200-1BV Manual

Casio Ur LW-200-1BV

Læs gratis den danske manual til Casio LW-200-1BV (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Casio LW-200-1BV, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Operation Guide 2672

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode Alarm Mode Stopwatch Mode Dual Time Mode

Press .

General Guide

•Press B to change from mode to mode.

•In any mode, press L to illuminate the display.

Day of week

Seconds

Hour : Minutes

PM indicator

Month – Day

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press B to move the flashing in the sequence shown

below to select other settings.

Seconds Hour Minutes

YearMonthDay of week Day

3. When the setting you want to change is flashing, press C to change it as

described below.

To change this setting

Seconds

Hour, Minutes, Year, Month,

Day, Day of week

Perform this button operation

Press .C to reset to 00

Press C to increase the setting.

Holding down changes the setting at high speed.C

•Pressing while the seconds are in the range of 30 to 59 resets them to andC00

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press A to exit the setting screen.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch s battery replaced.’

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping andC

24-hour timekeeping.

•With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, (24 indicator), times are displayed in the range of 0:00 to

23:59.

•The P and 24 indicators are not displayed with the Timekeeping Mode time in the

Alarm Mode and Dual Time Mode.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Alarm

When the daily alarm is turned on, the alarm tone sounds

when the alarm time is reached.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

•Alarm setting (and Hourly Time Signal setting) is

available in the Alarm Mode, which you enter by

pressing .B

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds,

regardless of the mode the watch is in.

Alarm time

(Hour : Minutes)

Timekeeping Mode tim

(Hour : Minutes)

Mode indicator

Hourly time signal

on indicator

Alarm on indicator

To set an alarm time

1. In the Alarm Mode, hold down A until the hour setting

starts to flash, which indicates the setting screen.

•This operation automatically turns on the alarm.

2. Press B to move the flashing between the hour and

minutes.

3. While a setting is flashing, use C to increase it.

Holding down changes the setting at high speed.C

•With the 12-hour format, set the time correctly as a.m.

(no indicator) or p.m. (P indicator).

4. Press A to exit the setting screen.

To stop the alarm tone after it starts to sound

Press any button.

To turn the Daily Alarm and Hourly Time Signal on and off

In the Alarm Mode, press to cycle through the on andC

off settings as shown below.

Alarm On Indicator/Hourly Time Signal On Indicator

Daily alarm

only

Both offBoth on Hourly Time

Signal only

•The alarm on (ALM) indicator flashes while the alarm is

sounding.

•The alarm on (ALM) indicator and Hourly Time Signal

on ( ) indicator are displayed in all modes.SIG

To test the alarm

In the Alarm Mode, hold down to sound the alarm.C

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

•The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

•The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

•The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

•Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

•All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing .B

To measure times with the stopwatch

Elapsed time

Start Stop Re-start Stop Clear

Start Split

( displayed)SPL

Split release Stop Clear

Start Split Stop Split release Clear

Split time

Two Finishes

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

Minutes

1/100 second

Mode indicator

Hours

Seconds

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone.

•In the Dual Time Mode, the seconds count is synchronized with the seconds count

of the Timekeeping Mode.

To set the Dual Time

1. Press B to enter the Dual Time Mode.

2. Hold down A until the hour setting starts to flash,

which indicates the setting screen.

3. Press B to move the flashing between the hour and

minutes settings.

4. Press C C to increase the setting. Holding down

changes the setting at high speed.

5. Press A to exit the setting screen.

Timekeeping Mode time

(Hour : Minutes)

Mode indicator

Seconds

Hour : Minutes

MA0307-EA

Operation Guide 2672

Three-second

indicator

Display Illumination

An LED (light-emitting diode) and a light guide panel

illuminate the entire display for easy reading in the dark.

•See “Display Illumination Precautions” for more

important information.

To illuminate the display

In any mode, press L to illuminate the display.

•You can use the procedure below to select either one

second or three seconds as the display illumination

duration. When you press , the display will remainL

illuminated for about one second or three seconds,

depending on the current display illumination duration

setting.

To specify the display illumination duration

In the Timekeeping Mode, hold down for about two seconds to toggle the displayC

illumination duration between three seconds ( displayed) and one second (3" 3" not

displayed).

•Pressing C also toggles between 12-hour and 24-hour timekeeping.

•When the three-second setting is selected, the three-second (3") indicator remains

on the display in all modes.

•To protect against running down the watch s battery, the watch automatically’

switches to the one-second setting about seven hours after the three-second setting

is selected. To continue to use the three-second setting, perform the above

procedure again.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto return features

If you leave a screen with flashing digits for one or two minutes without performing any

operation, the watch automatically saves any settings you have made up to that point

and exits the setting screen.

Display Illumination Precautions

•The illumination provided by the light may be hard to see when viewed under direct

sunlight.

•Display illumination automatically turns off whenever an alarm sounds.

•Frequent use of the light shortens the battery life.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	LW-200-1BV
Bredde:	34.9 mm
Dybde:	11.9 mm
Højde:	37.9 mm
Vægt:	20 g
Armbånd, materiale:	Resin
Vandfast:	Ja
Urkassens materiale:	Resin
Kalender:	Ja
Ur-indstilling:	12t/24t
Stopur:	Ja
Urtype:	Armbåndsur
Batterilevetid:	10 År
LED-baggrundsbelysning:	Ja
Batteritype:	CR1620
Antal understøttede batterier:	1
Urets glastype:	Resin
Alarmfunktion:	Ja
Mekanismetype:	Elektronisk
Se opkaldstype:	LCD-skive
Vandbestandigt tryk:	5 ATM
Vandbestandig dybde:	50 m
Husets farve:	Sort
Båndets hovedfarve:	Sort
Etui form:	Rund
Køn:	Hunstik
Nøjagtighed:	±20 sek/md
Kalendertype:	Dag