CDA KA30SS Manual

CDA Køkkenvask KA30SS

Læs gratis den danske manual til CDA KA30SS (3 sider) i kategorien Køkkenvask. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om CDA KA30SS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

www.cda.eu

ka30, ka32,

ka80 and ka82

Stainless Steel

Sinks

Installation

Before Installation

Oer up the sink to the worktop and/or the cabinets to conﬁrm that

the external dimensions of the bowls are compatible with the cabinets

themselves.

Conﬁrm that with the sink in position:

• There is adequate space to install any taps or other required

accessories.

• There is adequate space to install the waste pipework and that any

necessary modiﬁcation to internal shelves to accommodate the waste

(and trap) is acceptable.

• Access to any water stop-cock or other services will still be adequate

after the installation.

Installation

• Refer to the cut-out sizes on the back of this manual and use them

to mark out where the worktop needs to be cut. Double-check the

dimensions before cutting the worktop aperture.

• After cutting out the worktop aperture, we recommend you seal the

cut edges with silicone (or similar) sealant to help prevent ingress of

water.

• Position the supplied gasket around

the perimeter of the hole (Fig. 1).

• It is often easier to mount the taps,

waste-ﬁtting and overﬂow onto the sink

prior to ﬁtting the sink to the worktop.

• Ensure that the external edge of the

sink is positioned on the gasket, to Fig. 1

Produkt Specifikationer

Mærke:	CDA
Kategori:	Køkkenvask
Model:	KA30SS
Bredde:	860 mm
Dybde:	500 mm
Produktfarve:	Rustfrit stål
Installationsrum højde:	170 mm
Antal vaskeskåle:	1 skåle
Vask, type:	Top-monteret vask
Vask form:	Rektangulær
Vask materiale:	Rustfrit stål
Vandhane, hul:	Ja
Drænebræt:	Ja
Vandhane inkluderet:	Ingen