CDA TV5CH Manual

CDA Vandhane TV5CH

Læs gratis den danske manual til CDA TV5CH (2 sider) i kategorien Vandhane. Denne vejledning er vurderet som hjælpsom af 72 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 36.5 anmeldelser. Har du et spørgsmål om CDA TV5CH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

5 Year warranty:

All CDA taps are covered by a 5 year parts guarantee. Labour & ﬁtting costs are not included except under exceptional

circumstances. Decorative surface ﬁnishes and O-rings are guaranteed for ONE year from the date of purchase provided

that our advice concerning care has been observed. This is provided that the mixer has been used for normal domestic

purposes in the UK and that the care, installation and maintenance instructions have been observed. The warranty

extends to the original purchaser only. You should retain a copy of your dated invoice as proof of purchase to validate

any claims under this guarantee.

Care Instructions for your Tap:

To maintain the appearance of this tap, ensure that it is regularly cleaned only using a clean, soft damp cloth. A solution of

warm water and a mild liquid detergent may be used where necessary, and then the ﬁtting rinsed thoroughly and wiped

dry. Any other cleaning action will invalidate your warranty.

If the tap has a diffuser it should be cleaned periodically. Abrasive cleaners, scouring cleaners and acidic cleaners must not

be used under any circumstances. Avoid contact with all solvents (including chlorinated solvents, ketones or acetones as

these may result in surface deterioration or etching). Also avoid contact with any harsh household chemicals such as oven

cleaners, drain cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers friend or Brasso.

Important Technical Data:

*If these temperatures or pressures are exceeded, even for short periods, damage can result.

CDA taps are either WRAS approved or manufactured in accordance with recognised European standards. Please ensure that

your tap is ﬁtted in accordance with Local Water Byelaws.

These installation guidelines have been prepared for your direction and you must exercise due care at all times. We do not

accept responsibility for problems that may occur through improper installation. Whilst assembling the tap take care not to

accidentally loosen any screwed assemblies.

TV5CH Contemporary side single

lever tap

Minimum operating pressure 0.5 bar Maximum hot water temperature 90 °C*

Maximum operating pressure 12 bar*

Installation Preparation:

Before installing a new tap it is essential that you thoroughly ﬂush through the supply pipes in order to remove any

remaining solder, swarf or impurities from your system. Failure to carry out this simple procedure could cause problems

or damage to the internal components of the tap.

We strongly recommend installing particle ﬁlter strainers and isolation valves to both the hot and cold feed pipes in an

accessible position. This will help to prevent premature failure of the valves and ease any future maintenance.

All parts should be removed from their packaging and inspected for any transport damage prior to installation.

Turn off and drain the water supply to the sink, unless there are isolation valves ﬁtted.

This tap requires a 35mmø tap hole. If replacing an existing tap, remove the tap and clean the end of the feed pipes using

wire wool the tap hole area should be free from dirt and sealant. Loosely position the tap and tail pipes to check if any

alteration to the existing pipework is required, if this is the case do this now.

Installation:

After installation:

Once you have visually checked the new ﬁttings and connections, turn the water

supply back on and check all ﬁttings carefully for leaks. Then turn the tap back on

and check there are no leaks from the body or valve area.

Clean the tap to remove any marks created during installation as instructed then

replace the bag that has been provided to protect the tap until it is ready for use.

TV5CH Contemporary side single

lever tap

KEY DESCRIPTION QUANTITY

A Tap body 1

B Upper sink/worktop seal 1

C Horseshoe washer 1

D Horseshoe washer 1

E Studded rod 1

F Fixing nut 1

G Inlet pipe (offset) 1

H Inlet pipe 1

Produkt Specifikationer

Mærke:	CDA
Kategori:	Vandhane
Model:	TV5CH

Har du brug for hjælp?

Hvis du har brug for hjælp til CDA TV5CH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vandhane CDA Manualer

15 Marts 2024

13 Januar 2024

10 December 2023

7 Oktober 2023

13 August 2023

29 Maj 2023

10 Maj 2023

31 Marts 2023

3 Februar 2023

7 Januar 2023

Vandhane Manualer

Nyeste Vandhane Manualer

The Galley Tap Manual

18 Juni 2025

The Galley IWT D Manual

17 Juni 2025

The Galley Ideal Hot & Cold Tap Manual

17 Juni 2025

Deante Chili Clinic BDS 060 Manual

15 Juni 2025

Deante BCH 065M Manual

10 Juni 2025

Bone Belfast TBL1CM Manual

9 Juni 2025

Deante BFC 080M Manual

9 Juni 2025

Deante Aster BCA B730 Manual

9 Juni 2025

Deante BOC 062M Manual

9 Juni 2025

Deante BCY 060M Manual

9 Juni 2025