CDN SD5502 Manual

CDN Køkkenvægt SD5502

Læs gratis den danske manual til CDN SD5502 (4 sider) i kategorien Køkkenvægt. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om CDN SD5502, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Features

• NSF® Certied

• Tare function

• Data hold

• Field calibration

• Removable stainless steel platform

• Batteries/power adapter

• Selectable units

• Overload indication

• Battery status indication

• On/off button

• Auto-off after 2 minutes

• Platform Size: 11.40 W x 7.08 H (in)/

29.0 W x 18.0 H (cm), removable

• Resolution: 0 lb:0.2 oz, 5 g

• Power Adapter: 100-240VAC 50/60Hz input,

9V DC (500mA) output (included)

• Two AAA 1.5V IEC LR03 alkaline batteries (included)

Note: Clean the scale before each use.

Important: DO NOT IMMERSE IN LIQUID.

Note: In the following instructions, names of the

control buttons are shown in CAPS. Function

information that appears on the display is shown in

BOLD CAPS.

Battery Installation

Replace battery when LCD becomes dim. bAtt appears

on the display for 2 seconds before turning off when

the batteries need to be replaced.

1. Power off the unit before installing the batteries.

2. Remove battery cover on the bottom by pressing the

latch toward the battery cover and lifting up.

3. Install two AAA 1.5V IEC LR03 alkaline batteries

observing polarity shown in compartment.

4. Replace the battery cover until it clicks shut.

Power Adapter

Before using the external power adapter, make sure

that the printed voltage complies with the local

voltage.

Note: Use only an original CDN power adapter (AD-AC3302).

The use of another adapter is subject to approval by CDN.

1. Insert the adapter plug into the jack in the rear of

the scale.

2. To turn the scale on, press the ON/OFF button as

described in Section A: On/Off. The scale will remain

on until turned off.

Note: When the power adapter is plugged in, the auto-off

feature is disabled.

Model: SD5502

ProAccurate

Digital

Portion Control Scale

55 pounds/25 kilograms

by pounds:ounces and kilograms.grams

Operating Instructions

Place the scale gently on a hard and at surface and

make sure it is steady before use to obtain accurate

measurements.

A. On/Off

1. Press the ON/OFF button to turn on. The display

ashes ––– and then returns to zero.

2. Press and hold the ON/OFF button for

2 seconds to turn off.

B. Auto Off

The scale automatically turns off after 2 minutes

of inactivity when the AC adapter is not plugged in.

Note: Auto-off is disabled when the AC adapter is used.

C. Unit Selection

1. Press the UNIT button to select the desired unit.

The display switches between and .lb:oz kg.g

2. oz appears on the display when the weight is less

than 1 lb. Otherwise, both and appear on lb oz

the display.

3. g appears on the display when the weight is less

than 1 kg. Otherwise, kg appears on the display.

D. Hold Mode

1. Press and hold the HOLD button for 2 seconds.

HOLD ashes on the display for 15 seconds to

allow enough time to place an item on the scale.

Note: If no item is placed on the scale, the scale will

exit Hold Mode and return to Weighing Mode.

2. When the item is placed on the scale, the

item’s weight and appear on the display for HOLD

15 seconds.

3. When the hold time is over, the scale exits

Hold Mode automatically and returns to

Weighing Mode.

Note: During Hold Mode all buttons are locked.

E. Weighing Mode

1. Press the ON/OFF button to turn on. The display

ashes ––– and then returns to zero.

2. Place an item on the scale platform. The weight

of the item appears on the display within

1 second after the item is stable.

F. Tare

The tare function resets the scale display to zero in

order to measure only the weight of an item.

It is frequently used to subtract the weight

of containers.

1. When the scale is on, place a container on

the platform.

2. Press the TARE button to reset the display to

zero. The display ashes ––– and then returns

to zero.

3. Place the item into the container or directly on

the scale platform. The weight of only the last

item added will appear on the display.

4. Continue to repeat steps and 2. 3. to measure

the respective weights of additional items.

5. To clear the tare, remove all items from the

platform and press the TARE button. The display

is reset to zero.

G. Field Calibration

1. When scale is off, press and hold the ON/OFF

button until all segments are displayed (––– is

displayed rst and then all segments). When

all segments are displayed, press the ON/OFF

button 3 times within two seconds. The display

shows 11111, then , and then the 55555

version number and checksum appear before the

calibration number (ex: 2F205) appears.

2. While the calibration number is displayed, press

the ON/OFF button again. appears to verify the 0

weight of the empty platform.

3. After a few seconds the calibration number (ex:

2F205) appears again. Press the ON/OFF button

again. The calibration weight appears on the

display.

Note: To change the calibration units to grams or

pounds, press the UNIT button. 5 kg calibration

weights are available from CDN (WT05).

4. Put a 15 kg (or three 5 kg) calibration weight in

the center of the platform. The scale displays

more calibration numbers while the scale is

calibrating.

5. End appears on the display for 3 seconds if

the calibration is successful. Then the scale

automatically turns off. The scale has been

calibrated and is ready for use.

6. FAIL appears on the display for 3 seconds if

the calibration is not successful. Then the scale

automatically turns off. Return to step and try 1.

the calibration again. If calibration continually

fails, please contact CDN for further assistance.

H. Battery Status

bAtt: replace battery with two AAA 1.5V alkaline

cells. The scale turns off automatically after

2 seconds.

I. Error Messages

1. EEEE indicates an overload when the item

being measured exceeds the capacity of the

scale. Immediately remove the overweight item to

avoid causing permanent damage to your scale.

The scale turns off automatically after

2 seconds.

2. Err indicates an initialization problem. The scale

turns off automatically after 2 seconds. Turn on

the scale again. If the problem persists, please

contact CDN.

Note: Clean the scale platform before each use. The

stainless steel removable platform is dishwasher safe; the

removable plastic platform base is not dishwasher safe.

Note: Replacement removable platform, AC adapter and

5 kg calibration weight available.

Produkt Specifikationer

Mærke:	CDN
Kategori:	Køkkenvægt
Model:	SD5502

Har du brug for hjælp?

Hvis du har brug for hjælp til CDN SD5502 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køkkenvægt CDN Manualer

18 August 2024

18 August 2024

18 August 2024

18 August 2024

Køkkenvægt Manualer

Nyeste Køkkenvægt Manualer

14 Juni 2025

13 Juni 2025

13 Juni 2025

13 Juni 2025

Cardinal Detecto C6 Manual

12 Juni 2025

Cardinal Detecto AP-8 Manual

12 Juni 2025

Cardinal Detecto AP-4K Manual

11 Juni 2025

Cardinal Detecto PS-4 Manual

11 Juni 2025

Cardinal Detecto AP-20 Manual

11 Juni 2025

Edlund BRV-160 Manual

11 Juni 2025