Celestron Labs CM1000C Manual

Celestron Mikroskop Labs CM1000C

Læs gratis den danske manual til Celestron Labs CM1000C (8 sider) i kategorien Mikroskop. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Celestron Labs CM1000C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

English

Congratulations on your Celestron Labs

microscope purchase. Your new Celestron

Labs microscope is a precision optical

instrument, made of the highest quality

materials to ensure durability and long

life. It is designed to give you a lifetime of

enjoyment with minimal maintenance.

This CL-CM1000C microscope provides

powers from 40x up to 1000x. It is ideal for

examining specimen slides of yeasts and

molds, cultures, plant and animal parts,

ﬁbers, bacteria, etc.

Before attempting to use your Celestron

Labs microscope, please read these

instructions to familiarize yourself with

the parts and functions of the microscope.

Refer to the microscope diagrams to locate

the parts discussed in the manual. The ﬁnal

section of the manual provides simple care

and maintenance tips.

IN THE BOX

- Microscope CM1000C

- 3 objective lenses: 4x, 10x, 40x

(spring-loaded)

- 2 Eyepieces: 10x, 25x

- AC Adapter

- 10 Prepared Slides

- 3 AA Batteries

- Dust Cover

- Hex Key

PARTS

1. Eyepiece

2. Eyepiece Tube

3. Head

4. Nosepiece

5. Objective Lens

6. Stage

7. Stage Clips

8. Illuminator

9. Base

10. Illuminator Adjustment

11. Arm

12. Coaxial Focus Knob

13. Disc Diaphragm

14. Power Switch

SPECIFICATIONS

STAGE: Plain Stage with Clips –

3.5 in x 3.5 in (88 mm x 88 mm)

HEAD: 360° rotatable monocular with 45°

incline

MAGNIFICATION RANGE: 40x to 1000x

FOCUSER: Coaxial, coarse/ﬁne focus knob

OBJECTIVES: 4x, 10x, 40x

EYEPIECES: WF 10x, WF 25x

NOSEPIECE: Triple with click stop

ILLUMINATOR: LED, adjustable

CONDENSER: N.A. 0.65

DIAPHRAGM: Disc diaphragm with 6

aperture sizes

DIMENSIONS: 4.6 in x 6.3 in x 12.0 in

(117 mm x 160 mm x 305 mm)

WEIGHT: 3 lbs.- 14 oz / 1.76 kg

MAGNIFICATION TABLE

Use the following table to determine

magniﬁcation using your microscope’s

different eyepiece/objective lens

combinations.

OBJECTIVE LENS:

4x 10x 40x

WF 10X EYEPIECE:

40x 100x 400x

WF 25X EYEPIECE:

100x 250x 1000x

SETTING UP YOUR

MICROSCOPE

1. Remove the Styrofoam container from

the carton.

2. Carefully remove the microscope and

accessories from container and set them

on a table, desk, or other ﬂat surface.

3. Remove bag coverings from microscope.

4. Remove cap from eyepiece tube (2).

5. Remove the eyepieces from plastic bags.

6. Insert the 10x eyepiece into the eyepiece

tube (2).

7. Plug the AC adapter into the socket on

the back of the base (9).

8. Insert the plug end of the AC adapter

into the proper power source.

NOTE : Alternatively, the microscope can run on

three AA batteries. To install the batteries,

open the battery compartment on the base

(9) of the microscope using the Hex key.

Insert the three AA batteries (supplied)

and close the battery compartment.

MICROSCOPE OPERATION

Before viewing specimens, please read

these sections thoroughly regarding

focusing, changing power (magniﬁcation),

using the stage and adjusting illumination.

VIEWING A SPECIMEN

Carefully place a specimen slide under the

stage clips (7) and center the specimen.

The images you see in your microscope will

be upside down and reversed right to left.

Your microscope includes prepared slides to

help you get started.

You are now ready to focus and view the

specimen. Use caution to avoid damaging

the slide or object. When using higher

CM1000C

Model # 44129

powers while focusing, make sure the

objective lens (5) does not hit the slide or

specimen.

FOCUSING AND CHANGING

POWER (MAGNIFICATION)

1. Always start observing with lowest power

(4x objective lens and 10x eyepiece).

2. Place a specimen slide (or object) on

the stage (6) directly under the objective

lens (5). Gradually turn the focus knob

(12) until the specimen is in focus.

3. For higher powers, rotate the nosepiece

(4) to change the objective lens (5)

to 10x or 40x. This will yield a greater

magniﬁcation. Gradually turn the focus

knob (12) to refocus.

NOTE: Before turning the objective carriage, turn

the focus knob to lower the stage.

4. You can replace the 10x eyepiece

with the 25x eyepiece to obtain three

additional high power magniﬁcations,

including (1000x), the highest power

possible.

ADJUSTING THE

ILLUMINATION

Specimens of different sizes, thicknesses,

and colors require different levels of

illumination. To adjust illumination, turn

the illuminator adjustment wheel (10) to

either increase or decrease the illumination.

The illuminator adjustment wheel (10) has

eight illumination settings, with 1 being the

dimmest and 8 the brightest. Experiment to

ﬁnd the optimal lighting for your specimen.

DIAPHRAGM

The disc diaphragm (13) has six diameter

openings. These openings allow you to

adjust the amount of light passing through

the specimen. Adjusting the light can help

you maximize brightness and contrast.

CARE, MAINTENANCE AND

WARRANTY

Your Celestron Labs microscope is a

precision optical instrument and should be

treated with care at all times. Follow these

care and maintenance suggestions and your

microscope will need very little maintenance

throughout its lifetime.

• When you are done using your

microscope, remove any specimens left

on the stage.

• Turn off the power and unplug the power

cord (if applicable).

• Always place the plastic bag or dust cover

over the microscope when not in use to

help keep it clean.

• Store the microscope in a dry, clean place.

• Be very careful if using your microscope

in direct sunlight to prevent damage to

the microscope or your eyes.

• To carry your microscope, place one hand

on the “arm” of the microscope and the

other hand under the base for support. Do

not grasp your microscope by the focuser

knob or head.

• Clean the outside surfaces (metal and

plastic) with a moist cloth.

• Always unplug any cords before cleaning.

• Never clean optical surfaces with cloth or

paper towels as they can scratch optical

surfaces easily. Instead, use an air blower

or camel hair brush.

• To clean ﬁngerprints off of optical

surfaces, use a lens cleaning agent

and lens tissue available at most photo

supply stores. When cleaning, do not rub

in circles as this may cause streaks or

scratches.

• Never disassemble your microscope or

clean internal optical surfaces. Only

qualiﬁed technicians at the factory or an

authorized repair facility should attempt

these repairs.

• When handling glass specimen slides, use

care, as the edges can be sharp.

YOUR MICROSCOPE HAS A

TWO YEAR LIMITED WARRANTY.

FOR MORE DETAILED INFORMATION,

PLEASE VISIT

www.CelestronLabs.com

Torrance, CA 90503

TEL (800) 421-9649

www.CelestronLabs.com

(Products or instructions may change

without notice or obligation.) Designed and

intended for those 14 years of age and

older.

CM1000

MODÈLE N°. 44129

Français

Félicitations pour l’acquisition de votre

microscope Celestron Labs. Votre

microscope est un instrument optique de

précision, fabriqué avec des matériaux de

la plus grande qualité aﬁn d’assurer sa

durabilité et sa longue durée d’utilisation.

Il est conçu pour vous offrir une vie entière

de découvertes avec un niveau d’entretien

minimal.

Le microscope CL-CM1000C offre des

puissances d’agrandissement de 40x

à 1000x. Il convient parfaitement à

l’observation d’échantillons de levures et

de moisissures, de cultures, d’éléments

végétaux et animaux, de ﬁbres, de bactéries

et autres.

Avant de commencer à utiliser votre

microscope Celestron Labs, lisez ces

instructions pour vous familiariser avec les

composants et les fonctions du microscope.

Référez-vous au schémas du microscope

pour repérer les pièces mentionnées dans

le présent manuel. La dernière section

du mode d’emploi donne des conseils

d’entretien et de maintenance faciles à

appliquer.

DANS LA BOÎTE

- Microscope CM1000C

- 3 lentilles d’objectifs: 4x, 10x, 40x

(à ressort)

- 2 oculaires: 10x, 25x

- Adaptateur CA

- 10 lamelles préparées

- 3 Piles AA

- Housse de protection

- Clef allen

COMPOSANTS

1. Oculaire

2. Tube d’oculaire

3. Tête

4. Tourelle

5. Lentille de l’objectif

6. Platine porte-échantillons

7. Pinces de platine porte-échantillons

8. Illuminateur

9. Base

10. Molette de réglage de l’illuminateur

11. Bras

12. Bouton de mise au point coaxiale

13. Disque diaphragme

14. Interrupteur marche/arrêt

FICHE TECHNIQUE

PLATINE: Porte-échantillons: Platine

porte-échantillons simple avec

valets – 88 mm x 88 mm (3,5 po

x 3,5 po)

TÊTE: Monoculaire avec rotation à 360° et

inclinaison à 45°

PLAGE DE GROSSISSEMENT:

40x à 1000x

TUBE DE MISE AU POINT:

Molette de mise au point coaxiale,

mise au point grossière et ﬁne

OBJECTIFS: 4x, 10x, 40x

OCULAIRES: WF 10x, WF 25x

TOURELLE: triple avec butée à déclic.

ILLUMINATEUR: DEL réglable

CONDENSEUR: N/D 0,65

DIAPHRAGME: disque diaphragme avec 6

dimensions d’ouverture

DIMENSIONS:

117 mm x 160 mm x 305 mm

(4,6 po x 6,3 po x 12 po)

POIDS: 1,76 kg/ 3 lbs.- 14 oz

TABLEAU DE

GROSSISSEMENT

Utilisez le tableau suivant pour déterminer

le grossissement offert par les différentes

combinaisons d’oculaires et de lentilles.

LENTILLE DE L’OBJECTIF:

4x 10x 40x

OCULAIRE WF 10X:

40x 100x 400x

OCULAIRE WF 25X:

100x 250x 1000x

INSTALLATION DE VOTRE

MICROSCOPE

1. Retirez l’emballage de polystyrène du

carton.

2. Retirez le microscope et ses accessoires

avec soin de l’emballage et déposez-les

sur une table, bureau ou sur une autre

surface plate.

3. Sortez le microscope de son sachet.

4. Retirez le capuchon du tube de l’oculaire (2).

5. Retirez les oculaires de leurs sachets.

6. Insérez l’oculaire 10x dans le barillet

d’oculaire (2).

7. Branchez l’adaptateur secteur dans

la prise située à l’arrière de la base

(9).

8. Insérez la prise du cordon d’alimentation

dans une source d’alimentation

compatible.

REMARQUE: Le microscope peut également

fonctionner avec trois piles AA.

Pour installer les piles, ouvrez le

compartiment de la base (9) du

microscope à l’aide de la clef allen.

Installez les trois piles AA (fournies)

et fermez le compartiment.

Produkt Specifikationer

Mærke:	Celestron
Kategori:	Mikroskop
Model:	Labs CM1000C

Har du brug for hjælp?

Hvis du har brug for hjælp til Celestron Labs CM1000C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikroskop Celestron Manualer

Celestron Labs CM800 Manual

3 September 2024

Celestron Labs CM1000C Manual

30 August 2024

Celestron Labs CB2000C Manual

10 August 2024

Celestron 44301 Manual

23 Juli 2024

Celestron MicroDirect Manual

22 Juli 2024

Celestron Microscope Kit Manual

21 Juli 2024

Celestron 44320 Manual

24 Juli 2023

Celestron 44102 Manual

26 Januar 2023

Celestron Cosmos 3 MP LCD Manual

3 Januar 2023

Celestron 44110 Manual

8 December 2022

Mikroskop Manualer

Nyeste Mikroskop Manualer

MAGUS Metal V790 Manual

16 Juni 2025

MAGUS Stereo 7TH Manual

16 Juni 2025

16 Juni 2025

16 Juni 2025

16 Juni 2025

16 Juni 2025

MAGUS Stereo 7B Manual

16 Juni 2025

MAGUS MCD40 Manual

15 Juni 2025

MAGUS CLM90 Manual

15 Juni 2025

MAGUS Bio 260T Manual

15 Juni 2025