Celly BH10 Manual

Celly Hovedtelefon BH10

Læs gratis den danske manual til Celly BH10 (15 sider) i kategorien Hovedtelefon. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Celly BH10, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

BH10 Bluetooth® headset by Celly:

Overview

(1) Microphone

(2) Micro USB charging socket

(3) Multifunction button

(4) Volume key +

(5) Volume key –

(6) Speaker

(7) Indicate light

Read this user manual and in

particular the safety notes,

before using the product.

Keep the user manual for future

reference and include it when passing the

product on to third parties.

Esprinet S.p.A. will not in any way be held

responsible for injury or damage caused to

persons or property arising from misuse of

the product.

Warnings

Avoid listening at extreme volumes,

particularly for prolonged periods of time

when using the product.

If you use the product at an excessively high

volume, you could permanently damage your

hearing. Listen at a moderate volume.

Audio warnings, alerts and environmental

noises may sound diﬀerent when wearing

the product. Be aware of how these signals

diﬀer in terms of their sound so that you are

able to recognize the signals in corresponding

situations. Do not use the product when

driving motor vehicles, cycling, when

operating machines or in other situations

where impaired awareness of noises in your

surroundings could pose a risk to you or

others. At the same time, also observe the

legal regulations and provisions in the country

where you use the product.

To prevent malfunction or damage to the

product, avoid accidental falls, do not crush,

puncture or exercise a high level of pressure

on the product. Keep the product away from

humidity, water or other liquids.

Do not store or expose your product to any

source of heat, direct sunlight, radiators,

stoves or other heat sources such as the

dashboard of your car in the summer.

Do not try to modify, repair or disassemble

the product. Do not use a damaged product.

Do not under any circumstances use

aggressive cleaning agents, alcohol or other

chemical solutions for cleaning as they can

damage the housing or even impair the

functionality of the product.

Do not immerse the product in water or other

liquids. ere are no serviceable parts inside

the product. Never open/disassemble it.

Keep the product out of reach of children.

Never allow children or persons with

disabilities to use electrical products without

supervision.

Make sure that children do not play with the

plastic wrapping.

ey may swallow it when playing and

suﬀocate.

Make sure children do not remove any small

parts from the product and play with them.

Charging Your Headset:

1. Prior to using the headset for the ﬁrst time

or no use for a longtime, please fully charge

the battery.

2. Approximately 2 hours are required to fully

charge the headset.

3.e indicator light turns red while being

charged and will turn blue automatically after

being fully charged.

4.e headset will turn oﬀ automatically

when the battery is drained. Please charge

the headset as above steps in time to prolong

the battery's using life (Charging indication

will be delayed for a few minutes if the

headset has not been used for long time or

the battery is drained).

Turning on e Headset

In OFF MODE, press and hold MFB for 3

seconds, the indicator light ﬂashes blue for

3 seconds, the indicator light ﬂashes blue 3

times and the headset prompts are sounds.

Turning oﬀ e Headset

In ON MODE, press and hold MFB for 3

seconds, the indicator light ﬂashes red for 3

times and the headset prompts are sounds,

then the headset will enter into OFF MODE.

Pairing the

headset with the Cellphone

1. Ensure the headset is oﬀ, and the distance

between your

headset and phone is within 1 meter to

activate the Bluetooth function on the phone.

2. Press and hold MFB for 6 seconds until the

indicator light ﬂashes red and blue alternately

as PAIRING MODE.

3. Search Bluetooth devices (see the user

guide of your phone for instructions).

4. Select “BH10” headset from the device list

of the phone.

5.If the pairing code is required, please insert

the code “0000”.

6. Ensure there is no obstruction between

your headset and phone and within eﬀective

distance, you can use the headset freely.

7. If the headset has paired with your phone

but disconnected, it will pair automatically

again when turned on within operation range.

Answering a Call

Method 1: Shortly Press MFB of the Headset.

Method 2: Answer the call on your phone.

Ending a Call

Method 1: Shortly Press MFB of the Headset.

Method 2: End the call on your phone.

Rejecting a Call

Press and hold MFB of the Headset for 2

seconds.

e Last Number Redialing

Shortly press MFB TWICE to redial the last

phone number.

Adjusting e Volume

Press and hold “V+” /“V-”to adjust the volume

to meet your need.

Disconnecting

To disconnect the paired headset from

your phone, please turn oﬀ the headset or

disconnect the headset from the Bluetooth

menu of your phone.

When the headset and the mobile phone

have been paired, don’t need to do

connecting, the headset will automatically

connect with the mobile phone (ﬁrstly ensure

the mobile phone’s Bluetooth function have

open, and the distance between your headset

and phone is within eﬀective distance).

Maintenance

1. Do not use abrasive cleaning solvents to

clean the product;

2. Do not touch the product with any sharp

object as this will cause scratching and

damage;

3. Please keep the product away from high-

temperature, dust and humidity.

Speciﬁcations

Bluetooth® version: 5.0

Operation range: 10m

Frequency range: 2,402-2,480GHz

Maximum radiated power: <20mW

Battery: Li-polymer 3.7V/55mAh(0.20Wh)

Software: BH10_BT8895B_V1.0.1

Version: BT8895B

Charging voltage: 5V/500 mA MAX

Charging time: 2h

Talk time: 3h

Stand by time: Up to 57h

Size: 49.4*14.2*10mm

Weight: 7g

CUSTOMER’S INFORMATION FOR

RIGHT WASTE OF THIS PRODUCT

(Directive 2013/56/EU)

is marking on the product or its

packaging means that the product at the

end of its life, including the unremovable

battery, must be separated from other

types of waste to recycle it responsibly.

Safe use of this product is guaranteed

from the respect of this instructions

manual, keep it and carefully use it for all

life of the product. e product doesn’t

need any kind of technical maintenance,

NEVER DISASSEMBLE IT. e battery

inside the product is integrated and not

replaceable. Don not try to remove li-ion/

polymer battery included in inside the

product because can produce overheating

danger, burning and injury. e battery

must be removed only by qualiﬁed

professional technicians, that are able

to remove it without any kind of danger

and to recycle it in the respect of the law.

Users should give free end of life product

into the local separate collection centers

or to the retailer, in reason of one to one,

or free if the product size is bigger than

25 cm. Adequat waste disposal permit to

award the product to recycling, treatment

with eco-friendly compatible disposal

conduce to prevent possible harm to the

environment or human health and promote

the reuse and/or product materials

recycling. Unauthorized waste disposal of

electronic product, cell and battery from

household user involve currency legislation

sanctions.

is product complies with RoHS

2011/65/EU

-2015/863/EU

. e

product carries the CE mark and

complies with safety standards

established by the European Union.

Hereby, Esprinet SpA declares that the

product is in compliance with Directive

2014/53/EU and 2015/863/EU. e full

text of the EU declaration of conformity is

available at the following internet address:

www.celly.com/exchange/CELLY-SPA/

Dichiarazioni_di_conformita/BH10V3/

DOC_BH10.pdf

Celly® is a trademark owned by CELLY

S.p.A.

All brands are registered trademarks of

their respective owners.

Esprinet S.p.A., via Energy

Park 20, 20871 Vimercate

(MB) - Italy

Made in China.

User manual

BLUETOOTH EARPHONE

Model: BH10

Rev02 - 06.10.2021

Status

No.

Status Headset’s indicator light status

1 Pairing mode e headset can be searched, the indicator light ﬂashes

red and blue alternatively

2 Not

connected

e headset is not connected with the device; blue light

will ﬂash twice every 6 seconds

3 Standby

mode

e headset is connected with the device without any

other operations, blue light will ﬂash twice every 11

seconds

4 Call state When in a call, the indicator light ﬂashes blue twice

every 11 seconds

5 Charging

mode

e indicator light turns red while being charged, and will

turn blue automatically after being fully charged

Produkt Specifikationer

Mærke:	Celly
Kategori:	Hovedtelefon
Model:	BH10
Produktfarve:	Hvid
Produkttype:	Headset
Bluetooth:	Ja
Volumenkontrol:	Digital
Bluetooth-version:	3.0+HS
Anbefalet brug:	Bil
Forbindelsesteknologi:	Trådløs
Taletid:	3 t
Standby tid:	60 t
Bæremåde:	I ørerne
Headset type:	Mono
Mikrofontype:	Indbygget
Trådløs rækkevidde:	10 m
Ørekobling:	Intraaural
Betjeningstaster:	Volume +, Volume -