Certina Sport C034.455.16.037.01 DS Podium GMT Manual

Certina Ure Sport C034.455.16.037.01 DS Podium GMT

Læs gratis den danske manual til Certina Sport C034.455.16.037.01 DS Podium GMT (3 sider) i kategorien Ure. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Certina Sport C034.455.16.037.01 DS Podium GMT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

WWW.CERTINA.COM

359_EN / 03.17

1/3

PRECIDRIVE GMT Quartz

User's Manual

IA IB

* Models with screw-in crown:

IA Initial position (screwed in, not pulled out)

IB Neutral position (unscrewed, not pulled out)

Displays and functions

GMT display (2

time zone – 24 h)

Hour hand (local time)

Minute hand

Seconds hand

Date indicator

3-position crown:

Rest position (screwed in*, not pulled out)

Date setting position (unscrewed*, half pulled out)

III

Time setting position (unscrewed*, completely pulled out)













PRECIDRIVE GMT Quartz

WWW.CERTINA.COMWWW.CERTINA.COM

359_EN / 03.17 359_EN / 03.172/3 3/3

Congratulations!

We congratulate you on choosing a watch from CERTINA

, a Swiss brand among the most highly renowned in the world. Meticulously designed, using only

the highest quality materials and components, it is protected against impacts, temperature variations, water, dust and also features the DS concept.

This user manual applies to CERTINA

quartz watches equipped with the PRECIDRIVE F06.421 GMT movement. For the settings and operation of your

PRECIDRIVE watch, please refer to the instructions below.

To ensure that your watch operates with perfect precision for many years to come, we advise you to pay careful attention to the advice given in this user

manual.

The DS (Double Security) concept is characterised by:

– extreme impact resistance,

– an ultra-resistant sapphire crystal,

– a gasket inside the crown and a gasket around the winding stem guaranteeing the water resistance of the watch even when the crown is pulled out,

– a reinforced case back.

Settings

Models with screw-in crown

To ensure even better water resistance, some models are fitted with a screw-in crown (6). Before setting the time or date, you must first unscrew

the crown (6) to position IB, before pulling it out to position II or III.

Important : After each operation, you must always screw the crown back in to ensure that your watch remains water-resistant.

You are advised not to operate the crown (6) underwater.

Setting the GMT display (2

time zone)

• Pull the crown (6) out to position III; the seconds hand (3) will stop.

• Turn the crown (6) forwards or backwards to simultaneously set the GMT display (2

time zone) (1) and the minute hand (4). Don't worry

about setting the hour hand (local time) (2) or date hand (5) at this stage.

• Push the crown (6) back into position I. The seconds hand (3) will start running again.

• The GMT display (1) and minute hand (4) are now set.

Rapid date correction and local time setting

• Pull the crown (6) out to position Il. The seconds hand (3) will continue running.

• Turn the crown (6) forwards or backwards until you obtain the desired date. The hour hand (2) will advance in one-hour jumps and the date will change

whenever the hour hand passes midnight.

• When the date is set, continue turning the crown (6) to position the hour hand (2) to the desired local time.

• Push the crown (6) back into position l (and screw it back in if you have a screw-in crown model).

Advice for synchronising your watch

To synchronise the seconds hand (3) with an ofﬁcial time signal (radio/TV/Internet), pull the crown (6) out to position III; the seconds hand (3) will stop.

At the tone, push the crown (6) back into the rest position I.