Chamberlain MC100C-P2 Manual


Læs gratis den danske manual til Chamberlain MC100C-P2 (9 sider) i kategorien Garageportåbner. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Chamberlain MC100C-P2, eller vil du spørge andre brugere om produktet?

Side 1/9
UNIVERSAL GARAGE DOOR
MINI REMOTE CONTROL
The Universal Garage Door Mini
Remote Control can be
programmed to activate up to
two products, such as a garage
door opener, myQ
® light
controls, gate operator, or
commercial door operator. Each
button on the remote control
works independently of the other and must be programmed
separately. The images throughout this manual are for reference
only and your product may look different.
The Universal Garage Door Mini Remote Control can be
programmed to operate with different brands of garage door
openers. It is compatible with most garage door opener systems
manufactured by Chamberlain
®
, LiftMaster ®, Sears Craftsman ®
,
Garage Master ®
, Genie ®, Linear
® , Stanley ®
, Overhead Door ®,
Wayne Dalton ®, Moore-O-Matic
® , Do-It ®
, Master Mechanic ®,
Raynor ®, Sommer
®, Xtreme Garage ®, Ryobi ®, and True Value
®
.
MODELS MC100-P2 AND
MC100C-P2
WARNING: This product can expose
you to chemicals including lead, which
are known to the State of California to
cause cancer or birth defects or other
reproductive harm. For more information
go to www.P65Warnings.ca.gov.
To prevent possible SERIOUS INJURY or DEATH from a moving
gate or door:
ALWAYS keep remote controls out of reach of children.
NEVER permit children to operate, or play with remote control
transmitters.
Activate gate or door ONLY when it can be seen clearly, is
properly adjusted and there are no obstructions to door travel.
ALWAYS keep gate or door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or door.
* LiftMaster
®, Do-It
®, Master Mechanic
®, Raynor
®, True Value
®,
Sommer ®
, Xtreme Garage ®, Ryobi ®, and Sears Craftsman
® are
compatible with Chamberlain technology.
**Visit www.chamberlain.com/MC100 for Genie
® Intellicode II instructions.
Read instructions thoroughly BEFORE beginning. If using the
Universal Garage Door Mini Remote Control with residential
door openers, the remote control must be used only
with door openers manufactured after 1993 that
utilize photoelectric sensors. The photoelectric
sensors are always located on or near the bottom of
the door track.
STOP
Garage Door Opener
Brand
Type/Color of
Program/Learn button Year
Linear®Mega-Code '97-Current
Chamberlain®* Orange/Red '97-'03
Chamberlain®* Purple '05-Current
Chamberlain®* Green '93-'96
Genie® Overhead Door®Intellicode '95-Current
Genie®** Overhead Door®Intellicode '93-Current
Stanley®Secure Code '98
Chamberlain®* Yellow '11-Current
Sommer®Rolling Code ‘13-Current
Wayne Dalton®Rolling Code ‘99
Xtreme Garage®Fix Code ‘16-Current
Ryobi®Rolling Code ‘16-Current
The Universal Garage Door Mini Remote Control is compatible
with the following brands, which use a program/learn button:


Produkt Specifikationer

Mærke: Chamberlain
Kategori: Garageportåbner
Model: MC100C-P2

Har du brug for hjælp?

Hvis du har brug for hjælp til Chamberlain MC100C-P2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Garageportåbner Chamberlain Manualer

Garageportåbner Manualer

Nyeste Garageportåbner Manualer

Craftsman

Craftsman CMXZDCG4910 Manual

30 September 2024
Marantec

Marantec Digital 302 Manual

30 September 2024
Marantec

Marantec Comfort 270 Manual

30 September 2024
Novoferm

Novoferm Novomatic 803S Manual

22 September 2024
Somfy

Somfy SOLAR - AKKU KIT Manual

20 September 2024
Berner

Berner K60 Manual

20 September 2024
Marantec

Marantec Dynamic 127 Manual

14 September 2024