Note: Make sure to point the IRC directly at the receiver on the product.-6
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. 6. Press <AUTO> on the IRC-
2. Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1. 6. Press <SPEED> on the IRC-
2. Press . <%>
3. or Press <+> <–> to either increase or decrease the speed of the program.
Sound- Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound Active mode:-
• Press - <SOUND> on the IRC 6.
To adjust sound sensitivity in Sound Active mode:-
1. ss Pre <SENSITIVITY> on the IRC- 6.
2. Press . <%>
3. or Press <+> <–> to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1. 6. Press <MANUAL> on the IRC-
2. Press any number between to choose your color.<0> and <9>
To manually control the RGBWA+UV percentage:
1. 6. Press <MANUAL> on the IRC-
2. Press , <R>, , <G> <B> <W>, <A>, or <UV> (red, green, blue, white, amber, or ultraviolet) to choose your color.
Note: To use the white, amber, or UV color options, the fixture must be capable of outputting that corresponding color
light.
3. or Press <+> <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press <STROBE> on the IRC- 6.
2. or Press <+> <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
To fade the light output:
• Press - <FADE> on the IRC 6.
To black out the lights:
• Press -<BLACK OUT> on the IRC 6. This will turn off all the lights until the button is pressed again.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a
button is pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
These are basic instructions for the IRC-6. See your product's User Manual for more detailed operation.
