Chauvet REM 1 SQ Manual

Chauvet overvåge REM 1 SQ

Læs gratis den danske manual til Chauvet REM 1 SQ (16 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Chauvet REM 1 SQ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

English EN

Español ES

Français FR

Deutsch DE

Nederlands NL

Quick Reference Guide

Model ID: REM1

Scan the QR code to

access the product page,

warranty terms, and the

complete User Manual

Model ID: REM1SQ

QUICK REFERENCE GUIDE

REM 1 and REM 1SQ QRG Rev. 1

Safety Notes

These Safety Notes include important information about installation, use, and maintenance of the REM 1 and REM 1SQ.

FCC Statement of Compliance

This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment do interference to es cause harmful

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

What is Included

REM1

REM1SQ

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

AC Plug

• CAUTION:

• This product’s housing may be hot when operating. Mount this product in a location with adequate

ventilation, at least 20 in (50 cm) from adjacent surfaces.

• When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure,

allow the product to fully acclimate to the surrounding environment before connecting it to power.

• ALWAYS:

• Use a safety cable when mounting this product overhead.

• Connect this product to a grounded and protected circuit.

• DO NOT:

• Open this product. It contains no user-serviceable parts.

• Leave any flammable material within 50 cm of this product while operating or connected to power.

• Connect this product to a dimmer or rheostat.

• Operate this product if the housing, lenses, or cables appear damaged.

• Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect

it (IP30).

• ONLY use the hanging/mounting bracket to carry this product.

• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

• In the event of a serious operating problem, stop using immediately.

• 1 case (4 REM1)

• 1 Seetronic® PowerKON® power cable

• 4 Seetronic® PowerKON® power linking cables

• 4 Seetronic® etherKON® signal linking cables

• 5 spare LED masks

• User manual

• 1 case (8 REM1SQ)

• 1 Seetronic® PowerKON® power cable

• 8 Seetronic® PowerKON® power linking cables

• 8 Seetronic® etherKON® signal linking cables

• 5 spare LED masks

• User manual

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

Produkt Specifikationer

Mærke:	Chauvet
Kategori:	overvåge
Model:	REM 1 SQ

Har du brug for hjælp?

Hvis du har brug for hjælp til Chauvet REM 1 SQ stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

overvåge Chauvet Manualer

Chauvet REM1 Manual

4 Januar 2025

Chauvet F3X Manual

20 December 2024

Chauvet F2 Manual

20 December 2024

Chauvet Ground Stack Kit Manual

3 September 2024

Chauvet REM 3IP Manual

1 September 2024

Chauvet REM 3IP SQ Manual

1 September 2024

Chauvet REM 1 SQ Manual

1 September 2024

Chauvet REM 1 Manual

1 September 2024

Chauvet MT-07 Manual

1 September 2024

overvåge Manualer

Nyeste overvåge Manualer

BenQ DesignVue PD2730S Manual

8 April 2025

Asus VA279QGS Manual

8 April 2025

Acer EV227Q Manual

8 April 2025

BenQ PD3226G Manual

7 April 2025

Philips 221V8LB Manual

4 April 2025

Extron TLS 1025M Manual

2 April 2025

PureTools PT-SCREEN-100 Manual

1 April 2025

Viewsonic VG2752-2K Manual

30 Marts 2025

Satco S13165 Manual

30 Marts 2025

Satco S16434 Manual

30 Marts 2025