Chef's Choice Diamond Hone AngleSelect 1520 Manual

Chef's Choice Knivsliber Diamond Hone AngleSelect 1520

Læs gratis den danske manual til Chef's Choice Diamond Hone AngleSelect 1520 (64 sider) i kategorien Knivsliber. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Chef's Choice Diamond Hone AngleSelect 1520, eller vil du spørge andre brugere om produktet?

Side 1/64
MODEL 1520 InstructIOns
Angle Select® Knife Sharpener
Read these instructions before use.
It is essential that you follow these
instructions to achieve optimum results.
© 2014 EdgeCraft Corp.
DNLFGB
2
Important SafeguardS
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the AngleSelect
® Model 1520 in
water or other liquid.
3. Make sure that only clean knife blades are inserted in Model 1520.
4. Disconnect the appliance from its power source when not in use, before cleaning, during
service and when replacing parts.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner.
U.S. customers: You can return your sharpener to EdgeCraft’s factory for service where the
cost of repair or electrical or mechanical adjustment can be estimated. When the electrical
cord on this appliance is damaged, it must be replaced by the Chef’sChoice® distributor or
other qualified service to avoid the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local distributor where the cost of repair
or electrical or mechanical adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed by the manufacturer
because special tools are required. Please consult your Chef’sChoice® distributor.
7. CAUTION! This appliance may be fitted with a polarized power plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not modify the plug in anyway.
8. The use of attachments not recommended or sold by EdgeCraft Corporation may cause fire,
electric shock or injury.
9. The ChefsChoice® AngleSelect® Model 1520 is designed to sharpen American,
European, and Asian style knives. Do not attempt to sharpen scissors, ax blades or any
blade that does not fit freely in the slots.
10. Do not let the cord hang over edge of table or counter or touch hot surfaces.
11. When in the “ON” position (Red flash on switch is exposed when “ON”), the Chef’sChoice
®
sharpener should always be on a stable countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR AngleSelect ® Model 1520 WILL BE
SHARPER THAN YOU EXPECT. TO AVOID INJURY, USE AND HANDLE THEM WITH
EXTREME CARE. DO NOT CUT TOWARD ANY PART OF YOUR FINGERS, HAND OR BODY. DO
NOT RUN FINGER ALONG EDGE. STORE IN A SAFE MANNER.
13. Do not use outdoors.
14. Appliance is not intended to be used or cleaned by children or persons with reduced physi-
cal, sensory or mental capabilities or lack of experience and knowledge of the hazards
involved.
15. Do not use honing oils, water or any other lubricant with the AngleSelect
® Model 1520.
16. For household use only.
17.
SAVE THESE INSTRUCTIONS.


Produkt Specifikationer

Mærke: Chef's Choice
Kategori: Knivsliber
Model: Diamond Hone AngleSelect 1520

Har du brug for hjælp?

Hvis du har brug for hjælp til Chef's Choice Diamond Hone AngleSelect 1520 stil et spørgsmål nedenfor, og andre brugere vil svare dig