Chief CMS380 Manual

Chief Projektor tilbehør CMS380

Læs gratis den danske manual til Chief CMS380 (8 sider) i kategorien Projektor tilbehør. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Chief CMS380, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

I N S T A L L A T I O N I N S T R U C T I O N S

Truss Ceiling Adapter Accessory

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

CMS380

CMS380 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively “Milestone”), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all accessories are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this accessory can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this accessory is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

accessory.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located within the mounting system of the

CMS380 does not exceed 500 lbs (226.8 kg).

•The weight capacity of the CMS380 may be LIMITED

to the lowest weight capacity of any other component

or accessory used within the mounting system.

WARNING: Use this accessory only for its intended use as

described in these instructions. Do not use attachments not

recommended by the manufacturer.

WARNING: Never operate this accessory if it is damaged.

Return the accessory to a service center for examination and

repair.

WARNING: The CMS380 accessory is to be used vertically

ONLY! Do NOT install accessory to pipe or truss horizontally.

WARNING: Do not use this accessory outdoors.

NOTE: Accessory is intended to be used with the UL Listed

CPA Extension Column Series (not included).

IMPORTANT ! : The CMS380 accessory is designed for

installation to a steel supporting truss or pipe with an

outside diameter between 1.75" (44.45mm) and 2.0"

(50.8mm).

IMPORTANT ! : The CMS380 accessory is intended to

be used with the UL listed CMS Pipe Series and a 1-1/2"

NPT or NPSM following ANSI/ASME B1.20.1 (Schedule

40, 0.154" minimum thickness steel or aluminum-ASTM

B221) threaded extension column (not included).

--SAVE THESE INSTRUCTIONS--

Produkt Specifikationer

Mærke:	Chief
Kategori:	Projektor tilbehør
Model:	CMS380

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief CMS380 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Projektor tilbehør Chief Manualer

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

Projektor tilbehør Manualer

Nyeste Projektor tilbehør Manualer

Barco R9853370 Manual

14 Januar 2025

Roadinger MBT-3 Manual

6 Januar 2025

Peerless-AV PE1120-W Manual

26 December 2024

Peerless-AV PAP-SANYO-ST1 Manual

26 December 2024

Peerless-AV PAP-298 Manual

22 December 2024

Peerless-AV PWA-14S Manual

22 December 2024

Sony VPLL-Z4111 Manual

22 December 2024

NeoMounts BEAMER-C300 Manual

19 December 2024

NeoMounts BEAMER-C80 Manual

19 December 2024

NeoMounts BEAMER-W050SILVER Manual

19 December 2024