Chief HB52D Manual
Chief
Projektor tilbehør
HB52D
Læs gratis den danske manual til Chief HB52D (2 sider) i kategorien Projektor tilbehør. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Chief HB52D, eller vil du spørge andre brugere om produktet?
Side 1/2
I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8803-002019 Rev00
©2010 Milestone AV Technologies,
a Duchossois Group Company
09/10
Continued. . .
MODEL: HB-52D Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
PARTS
Figure 1
INSTALLATION
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1. Lower custom HB bracket onto top of projector. Ensure that triangle in bracket points toward front of projector. (See Figure 1)
2. Attach HB bracket to projector using four M4 x 12mm Phillips pan head screws through four holes in the HB bracket. (See Figure 1)
(1) BRACKET, Custom HB (4) WASHER, Flat, M4
(4) NUT, Flange, Hex, 5/16-18 (4) SCREW, Phillips Pan Head, M4 x 12mm
1
2
x 4
I N S T A L L A T I O N I N S T R U C T I O N S
Continued . .
CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is
recommended.
Figure 2
3. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.
4. With help of assistants, lift the projector and install it to the four studs extending from the VCM housing. Ensure that the VCM housing is
seated in slots on HB bracket. (See Figure 2)
5. Tighten the four 5/16" flange nuts. (See Figure 2)
4
5
VCM Housing
x 4
Seat VCM in HB
bracket slots
Produkt Specifikationer
| Mærke: | Chief |
| Kategori: | Projektor tilbehør |
| Model: | HB52D |
Har du brug for hjælp?
Hvis du har brug for hjælp til Chief HB52D stil et spørgsmål nedenfor, og andre brugere vil svare dig
Projektor tilbehør Chief Manualer
31 December 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025
Projektor tilbehør Manualer
- Unicol
- Kingpin Screens
- Vogel's
- Smart Media
- SMK-Link
- Barco
- Auna
- Peerless
- Gravity
- NewStar
- Christie
- V7
- Chipolino
- Kanto
- Tempest
Nyeste Projektor tilbehør Manualer
27 Marts 2025
27 Marts 2025
21 Februar 2025
30 Januar 2025
30 Januar 2025
28 Januar 2025
14 Januar 2025
6 Januar 2025
26 December 2024
26 December 2024