Cisco 10000-1P4-1AC Manual

Cisco Router 10000-1P4-1AC

Læs gratis den danske manual til Cisco 10000-1P4-1AC (6 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Cisco 10000-1P4-1AC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Data Sheet

Cisco 10000 Series Performance Routing Engine 4

The Cisco® 10000 Series Performance Routing Engine 4 (PRE4) (Figure 1) addresses

the demand for increased performance, scalability, and hierarchical quality of service

(HQoS) to support diverse network-edge requirements for residential and business

services markets.

Product Overview

The Cisco 10000 Series is a Service Provider edge aggregation router that oﬀers a single solution

for the diverse requirements of broadband aggregation, leased-line, Ethernet, ATM, and Frame

Relay services. The Cisco 10000 Series provides customers with superior price/performance,

industry-leading IP services, maximum platform scalability, and high availability.

Service providers require scalable networks to proﬁtably meet their customers' requirements for

better performance, more services, and higher reliability. Edge routers, such as the Cisco 10000

Series, are needed to manage higher-bandwidth requirements, more subscribers, and multiple

service levels ranging from best-eﬀort consumer Internet data services to high-priority business

applications, voice, and video.

Figure 1. Cisco 10000 Series Performance Routing Engine 4

Designed to meet new requirements from service providers for high-capacity aggregation with

sophisticated IP services, the Cisco 10000 Series PRE4 uses the latest generation of the Cisco

patented Parallel Express Forwarding (PXF) technology. PXF is a parallel multiprocessor

architecture that enables deployment of multiple IP services while maintaining peak performance

throughput. The PRE4 also supports the ﬂexible Hierarchal Queuing Framework (HQF) available

on the Cisco 10000 Series Routers. The HQF implementation on the PRE4 allows three levels

(class, logical, and physical) of scheduling to apply queuing and shaping (see Figure 2).

Applications

The Cisco 10000 Series PRE4 can be used to deliver triple-play services for both Ethernet and

ATM transport networks. A service provider can use the ﬂexibility and performance of the PRE4 to

simultaneously deliver data, voice, and video to both residential and business customers.

Data Sheet

Ethernet service examples include:

● Class – Multiple packet queues for data, voice, or video

● Logical – PPP or IP sessions grouped by Gold, Bronze, or Silver packages for bandwidth

and QoS levels

● Physical – QinQ or dot1Q VLANs to separate consumer, business, and wholesale

customers

ATM service examples include:

● Class – Multiple packet queues for data, voice, or video

● Logical – ATM virtual circuits grouped by Gold, Bronze, or Silver packages for bandwidth

and QoS levels

● Physical – ATM virtual paths to separate consumer, business, and wholesale customers

Figure 2. Examples of Three-Level Scheduling with HQF and the Cisco 10000 Series PRE4

Key Features and Beneﬁts

The Cisco 10000 Series PRE4 delivers both scalability improvements and new features:

● Provides up to 10 million packets per second (mpps) of processing power for increased

throughput

● Delivers Hierarchal Queuing Framework (HQF) for up to three levels of service granularity

● Supports increased bandwidth through link bonding connections between the PRE4 and

Cisco 10000 Series SPA Interface Processor (SIP)-600

11.2 Gbps transmit and receive (full duplex) to any SIP (total bandwidth distributed

across installed shared port adapters [SPAs])

2.8 Gbps transmit and receive (full duplex) to each full-height line card

1.4 Gbps transmit and receive (full duplex) to each half-height line card

● Includes 800-MHz route processor with 4 GB ECC protected DRAM for new features and

scalability improvements

● Delivers enhanced storage options for larger and more complex conﬁgurations

14 MB nonvolatile RAM (NVRAM)

128 MB Compact Flash – ﬁxed internal memory

512 MB or 1 GB Compact Flash – front panel removable memory

Produkt Specifikationer

Mærke:	Cisco
Kategori:	Router
Model:	10000-1P4-1AC
Vægt:	409 g
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Ethernet LAN-porte (RJ-45):	8
Ethernet LAN:	Ja
Strømforbrug (typisk):	210 W
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10,100 Mbit/s
Dimensioner (BxDxH):	406.4 x 48.4 x 253.2 mm
Forbindelsesteknologi:	Ledningsført
Ethernet WAN:	Ja
Netværksstandarder:	IEEE 802.1p
Driftshøjde:	60 - 4000 m
Fuld duplex:	Ja
Vægt (efter britisk standard):	9 Pund
Relativ luftfugtighed:	5 - 95 %
Strømforsyning:	210 W