GREAT BRITAIN • CUSTOMER SERVICE
tel internet 020 8247 9300 www.clasohlson.co.uk customerservice@clasohlson.co.uke-mail
postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Please read theentire instruction manual before use and save it for future reference. We reserve theright
for any errors in text or images and for making any necessary technical changes to this document. If you
should have any questions concerning technical problems please contact our Customer Services.
• Comes with 3 m cable and sensor.
• The sensor can be placed on thefloor under awashing machine or dishwasher,
thealarm unit conveniently on thewall above thework surface.
• When thesensor detects water thealarm emits anaudible signal.
• LED indicator for thebattery test function.
LED indications when thebattery test button is pushed:
Red LED Green LED Battery status
Off On The batteries are fully charged
On The batteries need changing within 24 hoursOff
Off Off The battery is flat
1. Open thebattery compartment and insert 2×LR6/AA batteries (not included).
Make sure to place thebatteries according to themarking in thebattery compartment.
2. Test thecapacity of thebatteries by pushing thebattery test button.
The LEDs indicate thecondition of thebatteries (see table).
1. First insert thebatteries as instructed above.
2. Place thealarm unit where it will alert you if thealarm should sound.
3. Remove thebacking from thedouble-sided adhesive tape on thesensor.
4. Place thesensor where there is arisk of water leakage or flooding, e.g. on thefloor under awashing
machine, dishwasher, boiler or in acellar. If thesensor is moved to anew place, thedouble-sided
tape should be replaced as theoriginal tape cannot be reused.
5. The alarm sounds when thesensor detects water and continues to sound as long as thesensor
Follow local ordinances when disposing of this product.
If you are unsure about how to dispose of this product contact your municipality.
Battery type 2×LR6/AA (not included)
Sensor cable length 3 metres
