Clas Ohlson RC123 Manual

Clas Ohlson Clockradio RC123

Læs gratis den danske manual til Clas Ohlson RC123 (9 sider) i kategorien Clockradio. Denne vejledning er vurderet som hjælpsom af 91 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 46 anmeldelser. Har du et spørgsmål om Clas Ohlson RC123, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
English
GREAT BRITAIN • customer service
tel: 08545 300 9799 customerservice@clasohlson.co.uk www.clasohlson.com/uke-mail: internet:
3
4
5
2
1
Ver. 20130624
Radio Controlled Alarm Clock
Art.no 36-5340 Model RC123
Please read theentire instruction manual before using theproduct and save it
for future reference. We reserve theright for any errors in text or images and any
necessary changes made to technical data. If you have any questions regarding
technical problems please contact our Customer Services.
Things to consider:
• Other wireless equipment using thesame frequency can reduce
thetransmission range.
• The range of all wireless equipment depends on thetype of obstacles located
between thetransmitter and thereceiver (e.g. aconcrete wall will interfere with
thesignal more than aplasterboard wall).
If you experience problems, try thefollowing:
• Turn off any other existing wireless equipment and check if this is thecause of
theproblem.
• Reposition thewireless equipment, shorten thedistance between thesending
and receiving devices or reduce thenumber of obstacles (walls, furniture, etc.)
between them.
What is aradio controlled clock?
A radio controlled clock is anextremely accurate timekeeping device. The time is
controlled by theatomic clock in Braunschweig, Germany (accuracy ±1 second per
1 million years). The clock has abuilt -in radio receiver that decodes theincoming
atomic clock signal (long wave 77.5 kHz). The product also has aprecisely
calibrated quartz clock movement with afrequency of 32 kHz that keeps it running.
The transmitter in Germany has anofficial range of 2,000 km. This means that
theUK and Ireland should be well within range.
Safety
• The alarm clock must only be repaired by qualified service technicians.
• The alarm clock is intended for indoor use only.
• Do not place thealarm clock where there is arisk of it falling into water or
other liquid.
• Do not place thealarm clock in damp or dusty environments or where it could
be subject to strong vibrations.
• Do not expose thealarm clock to extremely high or low temperatures. Do not
expose theproduct to direct sunlight.
• Never try to open, change or modify thealarm clock in any way.
• Always remove thebatteries if thealarm clock is not to be used for along time.
Buttons and functions
3. [ ▲ ] Increases and sets values for
date, time, alarm and activates
backlight
4. [ ▼ ] Decreases and sets values
for date, time, alarm and activates
backlight
5. Battery holder
4. Press [ Alarm on/off ] to turn thealarm on or off.
5. When thealarm sounds, both theset alarm time and alarm icon will flash.
6. Press [ Alarm on/off ] to turn thealarm off.
7. If no button is pushed thealarm will automatically shut off after 2 minutes.
12/24 hour time display
Press [ ▲ ] to select either a12 or 24 hour clock display.
Displaying seconds or day and language selection
Press [ ▼ ] to select whether to display seconds or current day.
Hold in [ ▼ ] for 3 seconds to select language from therolling display:
“DE” (German), “FR” (French), “IT” (Italian), “SP” (Spanish), “DU” (Dutch),
“SW” (Swedish) or “EN” (English). Release thebutton once thedesired
language is shown.
Dual time zone setting
1. Hold in [ ▲ ] until “F” appears in thedisplay.
2. Set the[ Date set, Time set, Alarm set switch in the . — ] Time set position
3. Press [ ▲ ] or [ ▼ ] until thedesired time zone is displayed (-12 to +12 hours).
4. Set the[ Date set, Time set, Alarm set switch in the position once all — ] —
desired settings have been entered.
5. Hold in [ ▲ ] to switch between local/normal time display and theother time zone.
Snooze function
Press [ ▲ ] or [ ▼ ] when thealarm sounds to activate thesnooze function.
The alarm will pause and then sound again after 4 minutes.
Display illumination
Press [ ▲ ] or [ ▼ ] to turn on thebacklight. The backlight has a5-second duration
and turns off automatically.
Care and maintenance
Clean theproduct using alightly moistened cloth. Only use mild cleaning agents,
never solvents or corrosive chemicals.
Troubleshooting guide
The clock is not working. • Check that thebatteries are not flat.
• Check for correct battery insertion.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
Specifications
Batteries 2×AAA/LR03
Size 80×80×30 mm
1. [ Alarm on/off ]
2. [ Date set, Time set,
Alarm set — ]
Display symbols
Time signal received
Time signal scan
PM (shown only for the12-hour clock display)
Alarm
Snooze
Time zone
British Summer Time (GMT+1)
Low battery
Operating instructions
1. Open thebattery cover by sliding it downwards.
2. Insert 2×AAA/LR03 batteries. Note thepolarity markings in thebattery
compartment to ensure correct insertion.
3. Once thebatteries have been inserted theclock will immediately begin
scanning for thetime signal transmission
4. If thetime signal is received, both time and date will automatically be set and
thereceived time signal icon will appear.
If no time signal is received, thesearch icon will stop flashing and no icon willap-
pear. The time and date must also be set manually.
Manually setting thedate
1. Set the[ Date set, Time set, Alarm set switch in the position. — ] Date set
2. Hold in [ ▲ ] or [ ▼ ] until thecorrect year appears. Release thebutton when
thecorrect year is shown.
3. Hold in [ ▲ ] or [ ▼ ] until thecorrect month appears. Release thebutton when
thecorrect month is shown.
4. Hold in [ ▲ ] or [ ▼ ] until thecorrect day appears. Release thebutton when
thecorrect day is shown.
Manually setting thetime
1. Set the[ Date set, Time set, Alarm set switch in the position. — ] Time set
2. Hold in [ ▲ ] or [ ▼ ] until thecorrect time appears.
Setting thealarm
1. Set the[ Date set, Time set, Alarm set switch in the position. — ] Alarm set
2. Hold in [ ▲ ] or [ ▼ ] until thecorrect alarm time appears.
3. Set the[ Date set, Time set, Alarm set switch in the position once all — ] —
desired settings have been entered.

Produkt Specifikationer

Mærke: Clas Ohlson
Kategori: Clockradio
Model: RC123

Har du brug for hjælp?

Hvis du har brug for hjælp til Clas Ohlson RC123 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Clockradio Clas Ohlson Manualer

Clas Ohlson

Clas Ohlson B36Q Manual

16 Juli 2025
Clas Ohlson

Clas Ohlson 31-4176 Manual

27 Juli 2024
Clas Ohlson

Clas Ohlson IP19 Manual

27 Juli 2024
Clas Ohlson

Clas Ohlson R0084-N Manual

10 Oktober 2023
Clas Ohlson

Clas Ohlson KT-3268 Manual

3 August 2023
Clas Ohlson

Clas Ohlson SR-482 Manual

10 November 2022
Clas Ohlson

Clas Ohlson NE-6200 Manual

28 Oktober 2022
Clas Ohlson

Clas Ohlson RC123 Manual

7 Oktober 2022

Clockradio Manualer

Nyeste Clockradio Manualer

TFA

TFA 98.1037 Manual

1 November 2025
iTOMA

iTOMA CKS3301U Manual

1 November 2025
Techno Line

Techno Line WT 765 Manual

31 Oktober 2025
Techno Line

Techno Line Modell X Manual

30 Oktober 2025
Techno Line

Techno Line Modell E Manual

30 Oktober 2025
Techno Line

Techno Line Modell SL Manual

29 Oktober 2025
Techno Line

Techno Line Modell SD Manual

29 Oktober 2025
Beurer

Beurer WL 65 Manual

15 Oktober 2025
Caliber

Caliber HCG01 Manual

9 Oktober 2025
Caliber

Caliber HCG 101 Manual

9 Oktober 2025