Cleco CWC-375P Manual

Cleco Skruemaskine CWC-375P

Læs gratis den danske manual til Cleco CWC-375P (44 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Cleco CWC-375P, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/44
Product Manual
PL12-1082
05/31/2017
CWC-250, CWC-375, CWC-500,
CWC-750 Series
Impact Wrenches
EN Product Manual
DE Produkthandbuch
FR Manuel produit
ES Manual del producto
IT Manuale del prodotto
PT Manual do produto
NL Producthandleiding
DK Produkthåndbog
SV Produktmanual
NO Produktmanual
FI Tuotekäsikirja
EL Εγχειρίδιοπροϊόντος
SL Priročnikzauporabo
SK Návod
CZ Návod k výrobku
ET Toote käsiraamat
HU Termékkézikönyv
LT Gaminio vadovas
LV Produktarokasgrāmata
PL Instrukcja produktu
BG Ръководствозаработаспродукта
RO Manual produs
RU Инструкциипоэксплуатации
HR Priručnikzaproizvod
TR ÜrünKullanımKılavuzu
ZH 产品手册
JA 製品マニュアル
KO 제품 매뉴얼
TH
VI CẩmNangSảnPhẩm
ID Panduan Produk
MS Manual Produk
For additional product information visit our website at http://www.apextoolgroup.com
Page 2
PL12-1082
05/31/2017
EN
Product Information
The original language of this manual is English.
Product Safety Information:
Intended Use:
These air impact wrenches are driven by compressed
air to assemble or remove threaded fasteners.
For additional product safety information refer to Apex
Tool Group, LLC or Apex Tool Group GmbH document
GS-2000, General Safety Air Assembly Tools.
This impact wrench must not be modied in any
manner unless approved in writing by Apex Tool
Group, LLC or Apex Tool Group GmbH. All safety
devices must be properly installed and maintained in
good working order. Abuse, misuse, or failure to obey
this and any other issued warnings may result if injury
or death.
EC Declaration of Conformity:
We afrm that this machine is in accordance with
the following EC regulations (2006/42/EC). Applied
harmonized standards are ISO 12100:2010.
The name, job function and address of the person
authorized to compile the technical le.
Mr. William Cain
Director - Global Engineering Services
Apex Tool Group
670 Industrial Drive
Lexington, SC 29072
_______________________
Signature: William Cain
Date: May 31, 2017
Noise and Vibration:
Air Line Lubrication:
Use Apex Tool Group, LLC or Apex Tool Group
GmbH’s lightweight air tool oil 500021 (available in
quantities shown in the following chart) or an SAE-5
lightweight spindle oil.
Apply 2-3 drops of oil, into the air inlet, after 8 hours
of operation.
Air Supply Line:
Power or speed regulation system:
Models that include a Power Regulation System
allows the operator to select desired relative output
power or speed. To regulate the power, adjust this
system to the desired level as indicated on the tool.
It is recommended that if this feature is needed, that
you adjust to the lowest power setting and gradually
advance towards the maximum setting, as needed.
The indicators marked on the tool are for reference
ONLY and DO NOT indicate specic levels of power.
Many parameters will affect the ultimate power output,
including but not limited to: supplied air pressure,
quality, volume, dimension of air hose, actuation time
of tool, pressure applied to throttle, joint specications,
etc. Calibrate the system, including the tool, to the
desired output level.
Service and Repair:
Tool service and repair should be performed by an
authorized Apex Tool Group, LLC or Apex Tool Group
GmbH Center. Refer to the last page of this manual
for locations.
Disposal:
Observe local disposal guidelines for all
components of this tool and its packaging.
Copyright Protection:
Apex Tool Group, LLC or Apex Tool Group GmbH
reserves the right to modify, supplement or improve
this document or the product without prior notice. This
document may not be reproduced in any way, shape
or form, in full or parts thereof, or copied to another
natural or machine readable language or to a data
carrier, whether electronic, mechanical, optical or
otherwise without the express permission of Apex Tool
Group, LLC or Apex Tool Group GmbH.
WARNING
† Pressure
(L
p
)
‡ Power
(L
w
)
Level *K
† K
pA
= 3dB measurement uncertainty
‡ Kw
A
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
Model
Sound Level dB(A)
(ISO15744)
Vibration m/s
2
(ISO28927)
Refer to the specification table in the back of this manual
for individual model sound level and vibration values.
Part No. Packaged Designation
540397 1 Quart (0.94 liter) Airlube 10W/NR-420LB DR
533485 1 US Gallon (3.78 liter) Airlube 10W/NR-420LB DR
Parameter Description
Air Hose
Minimum inside diameter: 3/8" (9.55mm)
Maximum length: 8.0' (2.4 m)
Working
pressure range
Performance rated at: 90 psi (620 kPa)
Compressed air
Air quality according to ISO 8573-1, quality
class 2.4.3
The compressed air must be clean and dry.

Produkt Specifikationer

Mærke: Cleco
Kategori: Skruemaskine
Model: CWC-375P

Har du brug for hjælp?

Hvis du har brug for hjælp til Cleco CWC-375P stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skruemaskine Cleco Manualer

Cleco

Cleco CWC-375P Manual

15 Oktober 2025
Cleco

Cleco MP2271 Manual

8 Oktober 2025
Cleco

Cleco CWC-500 Manual

8 Oktober 2025
Cleco

Cleco 19PCA05Q Manual

21 August 2025
Cleco

Cleco 19PTA04Q Manual

21 August 2025
Cleco

Cleco 19TCA03Q Manual

20 August 2025
Cleco

Cleco 19TTA03Q Manual

20 August 2025
Cleco

Cleco 19PTA06Q Manual

20 August 2025
Cleco

Cleco 19TCA09Q Manual

20 August 2025
Cleco

Cleco 19PCA03Q Manual

20 August 2025

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Megger

Megger TPT320 Manual

11 Oktober 2025
Bosch Blauw

Bosch Blauw Bosch GSR 10,8-LI Manual

5 Oktober 2025
StarTech.com

StarTech.com CTK55PCEDRIVE Manual

4 Oktober 2025
Stanley

Stanley FatMax FMC627D2 Manual

2 Oktober 2025
Bosch

Bosch GSR 12V-15 Professional Manual

2 Oktober 2025
Draper

Draper 83568 Manual

2 Oktober 2025
Draper

Draper Storm Force 89519 Manual

2 Oktober 2025
Draper

Draper D20 55343 Manual

1 Oktober 2025
NEO Tools

NEO Tools 14-010 Manual

29 September 2025
Yato

Yato YT-09512 Manual

29 September 2025