studio-grade quality, crafted to blend seamlessly into
your space while oering unparalleled functionality.
Simply attach your mic and let your voice take center
Standard 3/8" threading, with 3/8" to 5/8"
adapter 3/8" to 1/4" and axed
Hidden-channel cable management
STEP1: MOUNT THE BOOM ARM TO YOUR DESKTOP
❶ Unscrew the C-clamp and glide it along the edge of your desktop, ensuring that both the upper and lower
suaces of the C-clamp are rmly seated on at suaces.
Avoid using suaces with excessively rounded or overhanging edges for mounting.
❷ Tighten the lower section of the C-clamp until it is securely fastened.
USING THE EXTENSION RISERS
We have equipped this boom arm with two extension risers. Adjust the height as needed by
utilizing the extension risers based on your usage scenario.
STEP2: INSERT THE BOOM ARM INTO THE C-CLAMP
Lower the boom arm into the C-clamp, ensuring a secure t and smooth rotation in both directions.
STEP3: CONNECTING A MICROPHONE
The thread on the of the boom arm is US standard female 3/8". If your microphone has a Ball Head
3/8" female thread on the bottom, you can use it with a direct connection.
There are two hidden channel designed on the boom
arm. Connect your microphone cable to the mic, tuck the
microphone cable into the hidden channel, and then
STEP4: ADJUSTABLE JOINT DAMPING
After the microphone is securely attached to the AS-16
boom arm position the microphone to its desired
•Rotate the screw clockwise to increase the tension of
the internal springs—which may be necessa for heavier
3 minutes to register your
2 years extended warranty
■ Please email us at vip@cmteck.com
■ Title your email: Warranty& Order ID or send
(Order ID should be XXX-XXXXXXX-XXXXXXX )
• Additional adapters (3/8" to 5/8" adapter ,
3/8" to 1/4" adapter and microphone clip)
are provided for connecting your devices.
