COLBOR CPL-80 Manual

COLBOR Linse CPL-80

Læs gratis den danske manual til COLBOR CPL-80 (4 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om COLBOR CPL-80, eller vil du spørge andre brugere om produktet?

Side 1/4
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Projection Lens User Manual
CPL-80
Caring For Your COLBOR Product
• Keep corrosive chemicals, liquids, and heat sources away from the
product to prevent mechanics damage.
• Please wear protective gloves for adjustment while working to avoid
burn damage, and release it after it is cooled down.
• Do not leave the product unattended while in use. Keep out of reach
of children.
• Do not attempt to disassemble or modify the product. Doing so voids
warranty.
• Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
• Malfunction may be caused by dropping, impact of external force.
• Failure to follow all the instructions may result in mechanics damage.
• Warranty does not apply to human errors.
Operation Instructions
Align the projection lens with the groove around the lamp head and
clip it in, turn the projection lens in the direction of the arrow, and the
reector installation will be completed after the top rod rebounds.
Removal of projection lens: Please follow the instructions below.
Mount the gobo on the clip-attached side of gobo holder in place, then
insert the holder into the slot of the projection attachment, the holder
will be xated by the magnet inside.
*Please keep the clip attached side towards the front.
1. Installation and Removal of Projection Lens
2. Attaching the Gobos
Removal
Installation


Produkt Specifikationer

Mærke: COLBOR
Kategori: Linse
Model: CPL-80

Har du brug for hjælp?

Hvis du har brug for hjælp til COLBOR CPL-80 stil et spørgsmål nedenfor, og andre brugere vil svare dig