ComNet CNFE3DOE2 Manual

ComNet Server CNFE3DOE2

Læs gratis den danske manual til ComNet CNFE3DOE2 (46 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om ComNet CNFE3DOE2, eller vil du spørge andre brugere om produktet?

Side 1/46
INSTALLATION AND OPERATION MANUAL
CNFE3DOE2/M
RS232/422/485 DATA OVER ETHERNET TERMINAL SERVER
The ComNet CNFE3DOE2/M allows any combination of two RS-232, RS-422, or 2 or
4-wire RS-485 serial data circuits to be inserted onto any 10/100 Mbps Ethernet-based
network. The CNFE3DOE2/M units include two serial data input/output ports, and
three Ethernet ports featuring two electrical ports and one SFP port. It may be used to
tunnel serial data over an IP network or as a media converter, for converting copper
transmission media to fiber. Access one serial device from the Internet and another
serial device from a local area network (LAN) using SSH or SSL. The CNFE3DOE2/M
provides control of the remote hardware, as if it were connected directly to the PC
COM port. A USB to serial converter may be required in new PCs without a DB9 serial
connection. The CNFE3DOE2/M supports SNMP Version 1, RFC1155, RFC1213 &
RFC1215.


Produkt Specifikationer

Mærke: ComNet
Kategori: Server
Model: CNFE3DOE2

Har du brug for hjælp?

Hvis du har brug for hjælp til ComNet CNFE3DOE2 stil et spørgsmål nedenfor, og andre brugere vil svare dig