Cotech MM1510A Manual

Cotech Kværn MM1510A

Læs gratis den danske manual til Cotech MM1510A (48 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 92 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 46.5 anmeldelser. Har du et spørgsmål om Cotech MM1510A, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/48
ENGLISHSVENSK ANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen. Spara manualen
för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
Ver. 20130821
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
18-3206 MM1510A-UK
40-8043 MM1510A
Belt & Disc Sander
Bandslipmaskin
Båndslipemaskin
Nauhahiomakone
Bandschleifmaschine
2
ENGLISH
Belt & Disc Sander
Art. no 18-3206 Model MM1510A-UK
40-8043 MM1510A
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact Customer Services.
1. Safety
1.1 General safety instructions for your safety and the safety of others
1. Keep the working area tidy. Cluttered surfaces and benches invite accidents.
2. Do not use the machine in dangerous environments. The machine should not be used on moist or wet
surfaces or in rain. Make sure that the work area is well lit. When working in dusty atmospheres, make sure
that the air is adequately circulated. Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust.
3. Avoid electric shocks. Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators when using power tools.
4. Keep children and bystanders away. Keep children and visitors at a safe distance from electrical
machinery/tools and electric cables in the workplace.
5. Store power tools out of the reach of children. When not in use, power tools should be stored locked
away in a safe place, away from children.
6. Do not force the machine. The correct feed rate makes the work better and safer.
7. Use the correct tool for the job. Do not force a tool to perform a task that it was not designed for.
8. Wear suitable attire. Do not wear any loose-fitting clothing, gloves, necklaces, bracelets or other jewellery
that can get caught in moving parts. Non-slip footwear is recommended. Wear a hairnet or similar if you
have long hair.
9. Always wear safety glasses. Normal glasses are not tough enough to withstand impacts. Use a dust
mask or dust filter when working in dusty environments.
10. Connect dust extraction equipment. If the machine is equipped with facilities for removing dust and
sawdust, make sure that the facility is used correctly and emptied regularly.
11. Do not abuse the lead. Do not carry the machine by its mains lead. Do not use the mains lead to pull or
unplug the power tool, pull the plug out instead. Make sure that the mains lead does not come into contact
with heat, oil, or sharp edges.
12. Secure the workpiece firmly. Where possible, use clamps or a vice. You can then operate the tool using
two hands. This is much safer than holding the workpiece in one hand.
13. Do not overreach. Make sure that you stand steady and balanced all times.
14. Look after you tools. Make sure that they are clean and that the edges are sharp for maximum effect and
best results. Follow the manuals recommendations regarding lubrication and replacement of accessories.
If it is damaged it should be replaced by a qualified service technician. Inspect all leads and cables regularly
to check for any damage. Make sure that the machine’s handles and controls are clean, dry and free from
oil and grease.
15. Turn the power off. Pull out the plug and push in the emergency stop button before servicing or changing
any blades, drill bits, cutters or sanding discs.
16. Remove all spanners and repair tools. Make a habit of checking to make sure that the machine is free of
all spanners and tools before turning the power on.
17. Avoid accidental starts. Do not walk around with your finger on the trigger of a power tool if it is plugged
in. Make sure that the on/off switch is set to OFF before plugging in any power tool.
18. Use the correct extension leads. If you use extension leads outdoors, only use those designed for
outdoor use. Only use extension leads with adequate wire core area and roll out the whole lead.
19. Use common sense and be careful. Think carefully before carrying out every action, so that it is carried
out safely. Never operate machines/power tools when you are tired or under the influence of medicine.

Produkt Specifikationer

Mærke: Cotech
Kategori: Kværn
Model: MM1510A

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech MM1510A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kværn Cotech Manualer

Cotech

Cotech MM1510A Manual

21 Februar 2023

Kværn Manualer

Nyeste Kværn Manualer

DeWalt

DeWalt DCG426 Manual

10 August 2025
Ozito

Ozito LRT-4100U Manual

9 August 2025
DeWalt

DeWalt DWE4015 Manual

9 August 2025
DeWalt

DeWalt DWE4599 Manual

9 August 2025
Ozito

Ozito EGR-2050U Manual

9 August 2025
Ozito

Ozito PXAGS-500U Manual

9 August 2025
DeWalt

DeWalt DWE4206 Manual

9 August 2025
DeWalt

DeWalt DCG460 Manual

9 August 2025
Milwaukee

Milwaukee AG 800-125 EK Manual

9 August 2025
DeWalt

DeWalt DWE4347 Manual

9 August 2025