Creality CR20 Pro Manual
Creality
3D printer
CR20 Pro
Læs gratis den danske manual til Creality CR20 Pro (16 sider) i kategorien 3D printer. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Creality CR20 Pro, eller vil du spørge andre brugere om produktet?
Side 1/16
CR20 Pro 3D Printer Guide Bo
This guide book is for standard CR20 Pro.
Please plug the power cord into a three-hole power jack.
Detailed instructions for use are available on the TF card.
NOTES
1. Do not use the printer any way other than described herein in order to avoid
personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive
objects. We suggest placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as
this may cause poor print quality.
4. Before using experimental or exotic filaments, we suggest using standard
filaments such as ABS or PLA to calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a
grounded three-prong power outlet.
6. Do not touch the nozzle or printing surface during operation as they may be
hot. Keep hands away from machine while in use to avoid burns or personal
injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths
may become tangled in the printers moving parts leading to burns, possible
bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools.
Do not touch the nozzle directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and
wipe with a dry cloth to remove dust, adhered printing plastics or any other
material off the frame, guide rails, or wheels . Use glass cleaner or
isopropyl alcohol to clean the print surface before every print for consistent
results.
10. Children under 10 years of age should not use the printer without supervision.
Produkt Specifikationer
| Mærke: | Creality |
| Kategori: | 3D printer |
| Model: | CR20 Pro |
Har du brug for hjælp?
Hvis du har brug for hjælp til Creality CR20 Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig
3D printer Creality Manualer
17 Juli 2025
17 Juli 2025
9 Juni 2025
7 Juni 2025
24 Januar 2025
24 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
3D printer Manualer
- Leap Frog
- Anycubic
- Weller
- Weistek
- SINDOH
- Sharebot
- Orbbec
- Wasp
- Artillery
- Creality3D
- BFB
- Gembird
- Wanhao
- Craftbot
- Polaroid
Nyeste 3D printer Manualer
8 Juli 2025
1 April 2025
24 Februar 2025
4 Februar 2025
4 Februar 2025
26 Januar 2025
26 Januar 2025
26 Januar 2025
26 Januar 2025
26 Januar 2025