Creality HALOT-MAGE Manual

Creality 3D printer HALOT-MAGE

Læs gratis den danske manual til Creality HALOT-MAGE (13 sider) i kategorien 3D printer. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Creality HALOT-MAGE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

/ / /󰋜

halot-series halot-mage user-manual

Manual

Thank you for choosing our products. For the best experience, please read the instructions before operating

the Printer. Our teams are always ready to render you the best seices. Please contact us via the phone

number or e-mail address provided at the end when you encounter any problem with the Printer.

For a better experience in using our product, you can also access how to use the printer in the following ways:

View the accompanied instructions and videos on the U disk.

Visit our ocial website www.creality.com 󰏌 to nd relevant software/hardware information, contact details,

and operation and

maintenance instructions

The product has access to both LycheeSlicer and CHITUBOX. WIFI printing and access to the Creative Cloud

are under development.

HALOT-MAGE User Manual

Dear Consumers

Firmware/Software Downloads and Upgrades

Slicing software suppoed：
Download the rmware and HALOT BOX slicing software at: https://www.creality.com 󰏌
Download the CHITUBOX slicing software at: https://www.chitubox.com 󰏌
Download the LycheeSlicer slicing software at: https://lychee.mango3d.io 󰏌
Notes
. Do not use the printer any way other than described to avoid personal inju or propey damage.
. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print
quality.
. Please use recommended resin in case damage to machine.
. Do not place the printer near any heat source or ammable or explosive objects. We suggest placing it in a
well-ventilated, low-dust environment.
. Do not use any other power cable except the one supplied. Always use a grounded three-prong power
outlet.
. Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
. Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers
moving pas leading to burns, possible bodily inju, or printer damage.
. Please wait after the print is nished. please wear gloves to take out the print tools.
. Clean the printer frequently. Always turn the power o when cleaning, and wipe with a d cloth to remove
dust, adhered printing plastics or any other material o the frame,guide rails, or wheels. Use glass cleaner
or isopropyl alcohol to clean the print suace.
. Children under 10 years should not use the printer without supeision.
. Tips Do not plug or unplug the power cord when power on.
. Users should comply with the laws and regulations of the corresponding countries and regions where the
equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly
prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for
any violators' legal liability under any.
1. Equipment Introduction