Crestron CAEN-UMP1X2 Manual

Crestron Ikke kategoriseret CAEN-UMP1X2

Læs gratis den danske manual til Crestron CAEN-UMP1X2 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Crestron CAEN-UMP1X2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

CAEN-UMP – Universal Mounting Plates

Introduction

Crestron Universal Mounting Plates (CAEN-UMP Series)

are a complete line of accessory plates, which allow

mounting of non-Crestron equipment to any Crestron

Automation Enclosure (CAEN-Series). Third-party

products such as phone and alarm systems can be

mounted to these plates within an enclosure. The

advantage to using the CAEN-UMP is that a variety of

sizes are available and each plate occupies the same area

as one, two or four Crestron lighting modules (CLX-

Series). The size corresponds to the number of module

spaces and their arrangement within the enclosure. For

example, CAEN-UMP2x2 occupies four module positions

and CAEN-UMP1x1 occupies one module position. The

others (CAEN-UMP2x1 and 1x2) occupy two module

positions. Refer to the illustration on this page for an

example of plate location and orientation within a double-

wide enclosure. The table beneath the illustration lists the

dimensions and weight for each CAEN-UMP model.

Installation

The CAEN-UMP must be mounted in accordance with all

national and local codes.

NOTE: Adhere to Class 1 versus Class 2 wiring

requirements when considering the equipment

attached to the CAEN-UMPs in an enclosure.

NOTE: Third-party equipment attached to a

CAEN-UMP within a Crestron Automated Enclosure

should not be considered part of the Crestron system.

Use the four screws (8Bx1/4”, supplied) to attach a

CAEN-UMP to an enclosure. Crestron recommends that

the keyholes on the plates be located toward the outer

edges of the enclosure as shown in the drawing on this

page. As a result, the flanges of the plates do not overlap

each other when positioning any combination of CAEN-

UMP2x1s, CAEN-UMP1x1s, or lighting modules side-

by-side in an enclosure.

Further Inquiries

If after reviewing this guide, you cannot locate specific

information or have questions, please take advantage of

Crestron's award winning customer service team. Call:

• In the US and Canada, call Crestron’s corporate

headquarters at 1-888-CRESTRON

[1-888-273-7876] or 1-201-767-3400.

Example of CAEN-UMP Location and Orientation

2x2

2x1 2x1

1x2

1x1 1x1

Universal Mounting Plate Dimensions & Weight

CAEN-UMP 2x2 2x1 1x2 1x1

Height

Width

14 6

Depth

Weight

22 .6 12 .0 12 .4 6 .6

Dimensions are provided in inches, edge to edge.

Weight is provided in ounces.

Crestron Electronics, Inc. Installation Guide – DOC. 5981

15 Volvo Drive Rockleigh, NJ 07647 07.02

Tel: 888.CRESTRON

Fax: 201.767.7576 Specifications subject to

www.crestron.com change without notice.

Return and Warranty Policies

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange, or service without prior

authorization from CRESTRON. To obtain warranty service for CRESTRON

products, contact the factory and request an RMA (Return Merchandise

Authorization) number. Enclose a note specifying the nature of the problem,

name and phone number of contact person, RMA number, and return address.

2. Products may be returned for credit, exchange, or service with a CRESTRON

Return Merchandise Authorization (RMA) number. Authorized returns must be

shipped freight prepaid to CRESTRON, Cresskill, N.J., or its authorized

subsidiaries, with RMA number clearly marked on the outside of all cartons.

Shipments arriving freight collect or without an RMA number shall be subject to

refusal. CRESTRON reserves the right in its sole and absolute discretion to

charge a 15% restocking fee, plus shipping costs, on any products returned with

an RMA.

3. Return freight charges following repair of items under warranty shall be paid by

CRESTRON, shipping by standard ground carrier. In the event repairs are found

to be non-warranty, return freight costs shall be paid by the purchaser.

CRESTRON Limited Warranty

CRESTRON ELECTRONICS, Inc. warrants its products to be free from

manufacturing defects in materials and workmanship under normal use for a period

of three (3) years from the date of purchase from CRESTRON, with the following

exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt

heads and power supplies are covered for a period of one (1) year; touchscreen

display and overlay components are covered for 90 days; batteries and incandescent

lamps are not covered.

This warranty extends to products purchased directly from CRESTRON or an

authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the

nature and extent of the dealer's warranty, if any.

CRESTRON shall not be liable to honor the terms of this warranty if the product has

been used in any application other than that for which it was intended, or if it has

been subjected to misuse, accidental damage, modification, or improper installation

procedures. Furthermore, this warranty does not cover any product that has had the

serial number altered, defaced, or removed.

This warranty shall be the sole and exclusive remedy to the original purchaser. In no

event shall CRESTRON be liable for incidental or consequential damages of any

kind (property or economic damages inclusive) arising from the sale or use of this

equipment. CRESTRON is not liable for any claim made by a third party or made by

the purchaser for a third party.

CRESTRON shall, at its option, repair or replace any product found defective,

without charge for parts or labor. Repaired or replaced equipment and parts supplied

under this warranty shall be covered only by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, CRESTRON makes no other

warranties, expressed or implied, nor authorizes any other party to offer any

warranty, including any implied warranties of merchantability or fitness for a

particular purpose. Any implied warranties that may be imposed by law are limited

to the terms of this limited warranty. This warranty statement supercedes all previous

warranties.

Trademark Information

All brand names, product names, and trademarks are the sole property of their respective owners.

Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and

WindowsNT/2000 are trademarks of Microsoft Corporation.

Produkt Specifikationer

Mærke:	Crestron
Kategori:	Ikke kategoriseret
Model:	CAEN-UMP1X2

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron CAEN-UMP1X2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Crestron Manualer

Crestron FT2-700-ELEC-PTL Manual

30 Juli 2025

Crestron RMK-AMP-X Manual

30 Juli 2025

Crestron DIN-GWDL-SPLTR Manual

30 Juli 2025

Crestron HD-CTL-101 Manual

30 Juli 2025

Crestron FT2-202-ELEC-PTL Manual

30 Juli 2025

Crestron STIRP Manual

30 Juli 2025

Crestron CSP-LIR-USB Manual

30 Juli 2025

Crestron CEN-IO-COM-202 Manual

30 Juli 2025

Crestron CEN-IO-DIGIN-204 Manual

29 Juli 2025

Crestron DIN-DLI Manual

29 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025