Crestron DIN-EN-6X18-HC-5OPEN Manual

Crestron Ikke kategoriseret DIN-EN-6X18-HC-5OPEN

Læs gratis den danske manual til Crestron DIN-EN-6X18-HC-5OPEN (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Crestron DIN-EN-6X18-HC-5OPEN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

The Crestron® DIN-EN-2X18-HC-2OPEN, DIN-EN-3X18-HC-2OPEN,

and DIN-EN-6X18-HC-5OPEN are UL® Listed enclosures that provide a

centralized mounting solution for DIN-THSTAT thermostats and other

DIN rail modules. The enclosures contain two, three, or six DIN rails

(18M wide).

A hinged cover provides easy access to equipment wiring. The black

cover contains two or five cover openings that provide easy access to

the control surface on the DIN modules.

The design of the DIN-EN-3X18-HC-2OPEN and

DIN-EN-6X18-HC-5OPEN creates a fire enclosure which provides

an installation location for line-voltage (Class 1) devices. The fire

enclosure provides a barrier that maintains a separation between

Class 1 device installation and wiring in the fire enclosure and Class

2 device installation and wiring in the enclosure area with the cover

cutouts.

The fire enclosure contains one normal-height DIN rail and does not

include cutouts in the cover. The fire enclosure is perfectly suited

for devices like the DIN-PWS60 power supply or 24 VAC HVAC

transformers (not supplied).

DIN-EN-2X18-HC-2OPEN: 2 DIN rails, 2 cover openings

DIN-EN-3X18-HC-2OPEN: 3 DIN rails, 2 cover openings

DIN-EN-6X18-HC-5OPEN: 6 DIN rails, 5 cover openings

Check the Box

Item Qty

DIN-EN-2X18-HC-2OPEN, DIN-EN-3X18-HC-2OPEN, or

DIN-EN-6X18-HC-5OPEN

DIN-EN-2X18-HC-2OPEN Only

Plastic Cover, Blank, 3M Wide (P/N 2053599) 3

Plastic Cover, Blank, 9M Wide (P/N 2053600) 2

DIN End Bracket (P/N 2003740) 4

DIN-EN-3X18-HC-2OPEN Only

Plastic Cover, Blank, 3M Wide (P/N 2053599) 3

Plastic Cover, Blank, 9M Wide (P/N 2053600) 2

DIN End Bracket (P/N 2003740) 6

DIN-EN-6X18-HC-5OPEN Only

Plastic Cover, Blank, 3M Wide (P/N 2053599) 3

Plastic Cover, Blank, 9M Wide (P/N 2053600) 4

DIN End Bracket (P/N 2003740) 12

Important Notes

CAUTIONS:

• These enclosures house equipment that needs to be air-cooled.

Therefore, mount in a well-ventilated area. Allow adequate

clearance in front of the vented cover for servicing and

ventilation.

• All power feeds must be protected by 15- or 20-amp circuit

breakers (not included).

NOTES:

• The system specified in this guide is modular, and may require

assembly in the field by a licensed electrician, in accordance with

all national and local codes

• Enclosures are intended for indoor use only.

• When flush mounting, 5/8 in. (16 mm) drywall is preferred.

• Install all wiring in accordance with all local and national

electrical codes.

Mount the Enclosure

NOTES:

• Refer to Dimensions section on the following page for mounting

hole locations.

• Use mounting hardware that is appropriate for the mounting

scenario. Mounting hardware is not supplied.

To install the enclosure flush with drywall, secure the enclosure directly

to the concrete wall. Use 2 in. x 4 in. blocking, if necessary, to secure the

enclosure.

To install the enclosure on drywall, secure a piece of 1/2 in. (13 mm)

plywood to the framing and then secure the enclosure to the ply wood.

DIN Module Installation

NOTE: Remove the cover screws to access the inside of the enclosure.

Retain the cover screws to secure the cover to the enclosure. Refer to

“Secure the Cover” for cover screw locations.

Install the DIN End Brackets

Install the DIN end brackets to provide proper alignment for the DIN

modules. To install the DIN end brackets, place the DIN end brackets

on the DIN rail and then use a flat-head screwdriver to tighten the

mounting screw. The DIN end brackets should be flush with the end of

the DIN rail.

Install DIN End Brackets (DIN-EN-3X18-HC-2OPEN shown)

Install the DIN Modules

Secure the DIN modules to the DIN rail. To ensure proper alignment,

place the DIN modules next to the DIN end brackets.

Install DIN Modules (DIN-EN-3X18-HC-2OPEN shown)

Secure the Cover

When closing the cover, ensure that the DIN modules do not inhibit the

cover from closing. It may be necessary to make small adjustments to

the DIN modules or DIN end brackets to allow the cover to close.

Secure the cover with the cover screws. All screws must be used to

secure the cover.

CAUTION: The cover screws are required for proper grounding of the

cover.

DIN-EN-2X18-HC-2OPEN: 2 cover screws

DIN-EN-3X18-HC-2OPEN: 6 cover screws

DIN-EN-6X18-HC-5OPEN: 7 cover screws

Cover Screw Location (DIN-EN-3X18-HC-2OPEN shown)

DIN-EN-2X18-HC-2OPEN/DIN-EN-3X18-HC-2OPEN/DIN-EN-6X18-HC-5OPEN

DIN Rail Enclosure with Cover Openings and Hinged Cover

Produkt Specifikationer

Mærke:	Crestron
Kategori:	Ikke kategoriseret
Model:	DIN-EN-6X18-HC-5OPEN

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron DIN-EN-6X18-HC-5OPEN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Crestron Manualer

Crestron HZ2-BTNS-5 Manual

7 Oktober 2025

Crestron HZ2-AUX Manual

7 Oktober 2025

Crestron PW-2407WUL Manual

29 September 2025

Crestron C2N-UNI8IO Manual

28 September 2025

Crestron CLXI-4HSW4 Manual

24 September 2025

Crestron GLD-LED-50W Manual

24 September 2025

Crestron TPS-4LW Manual

23 September 2025

Crestron Zūm Manual

23 September 2025

Crestron SIMPL Manual

23 September 2025

Crestron UC-FCM-T Manual

23 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Physa TR-3 Manual

2 November 2025

Hendi 270882 Manual

2 November 2025

Obsidian WP1CAT6 Manual

2 November 2025

ANCEL FX6100 Manual

2 November 2025

ANCEL BST600 Manual

2 November 2025

ANCEL AJ600 GDI Manual

2 November 2025

Bogen ATP35 Manual

2 November 2025

ANCEL AJ600 Manual

2 November 2025

Arktic 204986 Manual

2 November 2025

Beverage-Air Horizon HFP3HC-1G Manual

2 November 2025