Crestron DM-NUX-L2-1G-W Manual

Crestron USB HUB DM-NUX-L2-1G-W

Læs gratis den danske manual til Crestron DM-NUX-L2-1G-W (7 sider) i kategorien USB HUB. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Crestron DM-NUX-L2-1G-W, eller vil du spørge andre brugere om produktet?

Side 1/7
The DM NUX USB over Network Wall Plates with Routing
( and ) deliver reliable, high-speed USBDM-NUX-L2-1G DM-NUX-R2-1G
signal extension and routing for USB 1.0, 1.1, and 2.0 devices throughout
a home, business, or campus for distances up to 330ft (100m).
Featuring Virtual Hub capabilities, five DM-NUX-R2-1G endpoints may
simultaneously be connected to a single DM-NUX-L2-1G endpoint.
Creating this virtual hub allows numerous USB devices to control a
single host device (such as a PC).
1
the local network and managed through a Crestron control system.
The DM-NUX-L2-1G and DM-NUX-R2-1G are functionally similar. For
simplicity within this guide, the term "USB endpoint" is used except
where noted. The USB endpoints are also compatible with the USB over
Ethernet Extenders with Routing ( and ).DM-NUX-L2 DM-NUX-R2
In
In
In
InIn the
the
the
thethe Box
Box
Box
BoxBox
1 DM-NUX-L2-1G
1
or DM-NUX-R2-1G
1
Additional
Additional
Additional
AdditionalAdditional Items
Items
Items
ItemsItems
2 Screw, 6-32 x 1/4in., Pan Head, SEMS (2007218)
1 Connector, 2-Pin (2003574)
1 Ferrite Bead, Cable Mount (2054945)
1. Refer to the and product pages for color variations.DM-NUX-L2-1G DM-NUX-R2-1G
1
1
1
11
DM-NUX-L2-1G
DM-NUX-L2-1G
DM-NUX-L2-1G
DM-NUX-L2-1GDM-NUX-L2-1G and
and
and
andand DM-NUX-R2-1G
DM-NUX-R2-1G
DM-NUX-R2-1G
DM-NUX-R2-1GDM-NUX-R2-1G
QuickStart
DM
DM
DM
DMDM NUX
NUX
NUX
NUXNUX USB
USB
USB
USBUSB over
over
over
overover Network
Network
Network
NetworkNetwork Wall
Wall
Wall
WallWall Plates
Plates
Plates
PlatesPlates with
with
with
withwith Routing
Routing
Routing
RoutingRouting
Install
Install
Install
InstallInstall the
the
the
thethe USB
USB
USB
USBUSB Endpoint
Endpoint
Endpoint
EndpointEndpoint
The USB endpoint uses Power over Ethernet (PoE) and mounts in a
North American, unobstructed, 1-gang electrical box (not included). A
minimum mounting depth of 2in. (51mm) is required. The
DM-NUX-L2-1G also receives power from the USB host port.
The DM-NUX-L2-1G and DM-NUX-R2-1G may be used without a control
system or DigitalMedia™ system to offer point-to-point USB extension
over a LAN or a dedicated CAT5e (or higher) cable.
NOTE:
NOTE:
NOTE:
NOTE:NOTE: A ferrite bead is provided to reduce or prevent EMI
(electromagnetic interference). When using a power source other
than PoE, Crestron recommends installing this ferrite bead on the
power supply cable close to the device.
Connect
Connect
Connect
ConnectConnect the
the
the
thethe USB
USB
USB
USBUSB Endpoints
Endpoints
Endpoints
EndpointsEndpoints
Connect the DM-NUX-L2-1G and DM-NUX-R2-1G.
NOTE:
NOTE:
NOTE:
NOTE:NOTE: Signal routing is not supported when the DM-NUX-L2-1G and
DM-NUX-R2-1G are used to provide point-to-point USB extension or
when PoE is not being used. In addition, a separate 24V 0.75A power
supply is needed.
1. Feed the CAT5e (or better) shielded twisted-pair (STP) cable through
the opening on the top of the electrical box.
NOTES:
NOTES:
NOTES:
NOTES:NOTES:
l
To comply with the European Directive (CE), Crestron
recommends using high-quality, solid core CAT5e (or better)
shielded twisted pair (STP) cable.
l
The CAT5e (or better) cable must have a straight-through
conductor configuration with no crossovers and must be
terminated with 8-conductor RJ45 connectors at both ends.
2. Using CAT5e (or better) cable, connect the LINK port on each
endpoint to an Ethernet network, the LAN port of a DigitalMedia
transmitter or receiver, or to the LINK port of another DM NUX
endpoint. The maximum cable distance is 330ft (100m).
CAUTION:
CAUTION:
CAUTION:
CAUTION:CAUTION: Do not connect the DM-NUX-L2-1G or DM-NUX-R2-1G
to a USB-EXT extender. The USB-EXT extenders are intended for
use as point-to-point USB extenders and must not be connected
to an Ethernet LAN or any other network device via the Link port.
3. Using a USB 2.0A to B cable (not included), connect the USB B end
to the DM-NUX-L2-1G host port ( ), and connect the USB A end
to a USB Type A port on the host device (USB 1.1 or 2.0 compatible).
2
2
2
22
DM-NUX-L2-1G
DM-NUX-L2-1G
DM-NUX-L2-1G
DM-NUX-L2-1GDM-NUX-L2-1G and
and
and
andand DM-NUX-R2-1G
DM-NUX-R2-1G
DM-NUX-R2-1G
DM-NUX-R2-1GDM-NUX-R2-1G
QuickStart
DM
DM
DM
DMDM NUX
NUX
NUX
NUXNUX USB
USB
USB
USBUSB over
over
over
overover Network
Network
Network
NetworkNetwork Wall
Wall
Wall
WallWall Plates
Plates
Plates
PlatesPlates with
with
with
withwith Routing
Routing
Routing
RoutingRouting


Produkt Specifikationer

Mærke: Crestron
Kategori: USB HUB
Model: DM-NUX-L2-1G-W

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron DM-NUX-L2-1G-W stil et spørgsmål nedenfor, og andre brugere vil svare dig