Crestron HZA-CONV-THSTAT-2WIRE Manual

Crestron Termostat HZA-CONV-THSTAT-2WIRE

Læs gratis den danske manual til Crestron HZA-CONV-THSTAT-2WIRE (5 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Crestron HZA-CONV-THSTAT-2WIRE, eller vil du spørge andre brugere om produktet?

Side 1/5
The Crestron® HZA-CONV-THSTAT-2WIRE is an adapter for the
Horizon® Wireless Thermostat (sold separately) that HZ-THSTAT
eliminates the need to add a common wire in retrofit applications. The
adapter allows the HZ-THSTAT to power itself and perform an HVAC
call, with as few as two wires, without stealing power from the HVAC
call relay connections. The adapter can also be used to add an additional
wire for a system upgrade if a common wire is already present.
The HZA-CONV-THSTAT-2WIRE is installed near the HVAC equipment
and can be mounted with either mounting screws (included) or double-
sided tape (included). HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE
In the
In the
In the
In the In the Box
Box
Box
BoxBox
1HZA-CONV-THSTAT-2WIRE, Common Wire Adapter for
HZ-THSTAT
 
Additional Items
Additional Items
Additional Items
Additional Items Additional Items
2 Screw, 6-20 BSD, #2 PT, Self Drill, 1/2 in. Hex, Steel
(2056229)
2 Tape, 1.5 in. x 0.75 in., Double Sided (2048130)
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE QuickStart
Common
Common
Common
CommonCommon Wire
Wire
Wire
WireWireAdapter
Adapter
Adapter
AdapterAdapter for
for
for
forforHZ-THSTAT
HZ-THSTAT
HZ-THSTAT
HZ-THSTATHZ-THSTAT
1
1
1
11
Install the
Install the
Install the
Install the Install the Device
Device
Device
DeviceDevice
Install the HZA-CONV-THSTAT-2WIRE near the HVAC equipment. It can
be mounted to most flat surfaces with self-drill mounting screws
(included) or double-sided tape (included).
Mounting with
Mounting with
Mounting with
Mounting with Mounting with Double-Sided Tape
Double-Sided Tape
Double-Sided Tape
Double-Sided Tape Double-Sided Tape
Two pieces of double-sided tape are provided. The illustration below
depicts the recommended placement for the double-sided tape on the
HZA-CONV-THSTAT-2WIRE. Make sure the HZA-CONV-THSTAT-2WIRE
and the mounting surface are both clean before attaching the tape.
Mounting with
Mounting with
Mounting with
Mounting with Mounting with Included Screws
Included Screws
Included Screws
Included ScrewsIncluded Screws
Before mounting the HZA-CONV-THSTAT-2WIRE, prepare the
mounting surface. A power drill is required for the installation.
1. Place the HZA-CONV-THSTAT-2WIRE on the mounting surface.
2. Make a center mark through both of the HZA-CONV-THSTAT-2WIRE
mounting holes.
3. Partially screw one of the included screws to the mounting surface.
4. Align the HZA-CONV-THSTAT-2WIRE with the screw, and continue
tightening the screw.
2
2
2
22
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIRE
HZA-CONV-THSTAT-2WIREHZA-CONV-THSTAT-2WIRE QuickStart
Common
Common
Common
CommonCommon Wire
Wire
Wire
WireWire Adapter
Adapter
Adapter
AdapterAdapter for
for
for
forfor HZ-THSTAT
HZ-THSTAT
HZ-THSTAT
HZ-THSTATHZ-THSTAT


Produkt Specifikationer

Mærke: Crestron
Kategori: Termostat
Model: HZA-CONV-THSTAT-2WIRE

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron HZA-CONV-THSTAT-2WIRE stil et spørgsmål nedenfor, og andre brugere vil svare dig