Crosley iJuke Premier CR1702A Manual

Crosley Hi-Fi system iJuke Premier CR1702A

Læs gratis den danske manual til Crosley iJuke Premier CR1702A (6 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Crosley iJuke Premier CR1702A, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
910-102020-0010-200
Crosley Radio, Inc. warrants the product to be free from defects in material and
workmanship under normal use for a period of one year from the original date of
purchase. This warranty is not transferable. If the product is determined to be defective
during the warranty period, the unit will be repaired or replaced at Crosley Radios sole
discretion. This warranty covers manufacturing defects and normal consumer use and
does NOT cover damage or failure as a result of abuse, accident, alterations, misuse,
neglect, abnormal wear and tear, inadequate maintenance, commercial or unreasonable
use, damage caused by power surges, mishandling, accident, acts of God or attempted
repair by an unauthorized service agent. Also not covered are cosmetic damages,
cords and antennas.
Should this product fail to function in a satisfactory manner, it is best to first return it
to the store or retailer where it was originally purchased. If additional service is still
needed, the original purchaser must contact our offices to obtain an RA (ReturnFIRST
Authorization) Number.
TO OBTAIN AN RA NUMBER
CALL: 1.888.CROSLEY
(1.888.276.7539)
Send the unit prepaid to the address below in the original packaging (or reasonable
substitute to prevent damage). Clearly mark your RA number on the outside packaging
and include the original sales receipt (or a copy) indicating date of purchase, amount
paid, and place of purchase. You must also include your full name, shipping address
and daytime contact number. Please include a check or money order in the amount
of $19.95, made payable to Crosley Radio, to cover handling and return shipping
charges. Returned products will not be shipped to PO Boxes. Crosley Radio will not
be responsible for delays or unprocessed claims resulting from a purchasers failure
to provide any or all of the necessary information.
CROSLEY RADIO
ATTN: RETURNS DEPT
2001 PRODUCTION DRIVE
Louisville, KY 40299
For additional support: Crosley Radio Consumer Service Department
24 hours a day / 7 days a week
Telephone: 1.888.CROSLEY (1.888.276.7539)
There are no express warranties except as listed above.
The purchasers bill of sale is the only proof of warranty entitlement.
This warranty gives the purchaser specified legal rights in addition to any rights which
may vary from state to state.
In accordance with the Moss-Magnuson Warranty Act of July 10, 1975, this is termed
a limited warranty which in no way compromises Crosley Radios high standards of
quality and workmanship.
LIMITED MANUFACTURERS WARRANTY
iJuke Premier
CR1702A
Instruction Manual
www.crosleyradio.com
9
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
For Compact Disc Units Only:
INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED
OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
Specification
Power Source : AC 120V ~ 60Hz
Power Consumption : 30W
Speaker : 4 Dynamic Type x 2
Speaker Wattage : 5 W
Speaker Ohm : 4 Ohm
Output Wattage : 2W per channel
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
CD Player
Programmed CD Playback
1Make sure the power is on.
2Press CD / iPod BUTTON (22). The CD
display (- -) will flash, then show (0 0) .
3Press OPEN / CLOSE BUTTON (24) to open
CD DRAWER (11) .
4Insert CD in tray with the label side of CD
facing up.
5Press the OPEN / CLOSE BUTTON (24) again
to close the CD DRAWER (11).
6Press PLAY / PAUSE BUTTON (23) to begin
playing the CD.
7To stop playing, press the STOP BUTTON
(19).
8To skip to a different track, press the BACK
SKIP (18) or the FORWARD SKIP (26) button.
9By pressing and holding either the BACK SKIP
(18) or FORWARD SKIP BUTTON (26), you
can rewind or fast forward through each
individual tack. The track will fast forward or
rewind as long as you are holding the button.
Once you let off the button, regular playback
resumes.
10 During playback, you can use the repeat
function to repeat a single song or the whole
CD.
11 While the song you want to repeat is playing,
press the REPEAT (20) button once. You will
see the REPEAT INDICATOR (5) on the
jukebox start to flash. The song will start over
once it is finished.
12 Press the REPEAT (20) button a second time
to repeat the whole CD. The REPEAT
INDICATOR (5) will stay on without flashing.
13 Pressing the REPEAT (20) button a third time
will disable the repeat function.
CD Operation
This CD player is programmable which allows you
to program it to play only selected tracks. To program,
follow the steps below.
1Insert disc and close CD DRAWER (11). Do
not press play yet.
2Press the PROGRAM (21) button. The
PROGRAM INCICATOR (4) on the jukebox
will start to flash.
3Use the BACK SKIP (18) or FORWARD SKIP
BUTTON (26) to select a track you want to
program.
4Once you have selected a track, press the
program button again. This stores the track
into memory.
5Use the BACK SKIP (18) or FORWARD SKIP
BUTTON (26) to select the next track you want
to program. Once selected, press the program
button again.
6Repeat step number 5 until you have
programmed all desired tracks.
7Press PLAY / PAUSE BUTTON (23) to begin
playing the selected tracks. The program light
will stop flashing and the selected tracks will
begin playing. They will play in the order that
they were programmed.
8Using the BACK SKIP (18) or FORWARD
SKIP BUTTON (26) will only skip through the
programmed tracks.
9To clear programmed tracks, press the stop
button twice until the program light goes out.
10 Programmed tracks will also be erased from
memory when the CD DRAWER (11) is opened
or when the power is turned off.

Produkt Specifikationer

Mærke: Crosley
Kategori: Hi-Fi system
Model: iJuke Premier CR1702A

Har du brug for hjælp?

Hvis du har brug for hjælp til Crosley iJuke Premier CR1702A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hi-Fi system Crosley Manualer

Crosley

Crosley iJuke Premier CR1702A Manual

19 Juli 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

Pro-Ject

Pro-Ject Head Box E Manual

30 Juli 2025
Pro-Ject

Pro-Ject Uni Box S3 Manual

30 Juli 2025
Hamilton Buhl

Hamilton Buhl PA-25 Manual

30 Juli 2025
SSL

SSL SQ4 Manual

29 Juli 2025
SSL

SSL ML46DB Manual

29 Juli 2025
SSL

SSL ML39USA Manual

29 Juli 2025
SSL

SSL Evolution EV2.200 Manual

29 Juli 2025
SSL

SSL Evolution EV4.400 Manual

29 Juli 2025
Panasonic

Panasonic SH-ALL1CP Manual

29 Juli 2025
SSL

SSL ML42B Manual

29 Juli 2025