Crucial CP16G4DFRA32A Manual

Crucial Ikke kategoriseret CP16G4DFRA32A

Læs gratis den danske manual til Crucial CP16G4DFRA32A (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Crucial CP16G4DFRA32A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Install Guide

Memory Module Installation

Equipment needed

• Memory module(s)

• Non-magnetic-tip screwdriver (for removing the cover

on your computer)

• Your system’s owner’s manual

Installation process

1. Make sure that you are working in a static-safe environment.

Remove any plastic bags or papers from your work space.

2. Shut down your system and make sure the power is

completely o before unplugging the power cable from your

computer. For laptops, then remove the battery.

3. Hold the power button for 3-5 seconds to discharge residual

electricity.

4. Remove your computer’s cover. Refer to your owner’s

manual for how to do this.

The memory & storage experts™

5. To protect your new memory modules and your system’s

components from static damage during the installation

process, touch any of the unpainted metal surfaces on

your computer’s frame before handling and installing

memory.

6. Using your system’s owner’s manual, locate your

computer’s memory expansion slots. Do not use any

tools in the removal or installation of memory modules.

7. Insert your new memory module(s) in accordance with

the illustrations in this guide. Align the notch(es) on the

module with the notch(es) in the slot, and then press the

module down until the clips on the slot snap into place.

(It can take 20 to 30 pounds of pressure to install a

module.) Fill the memory slots on your computer starting

with the highest density (i.e. put the highest density

module in bank 0).

8. Once the module(s) have been installed, replace the

cover on your computer and reconnect the power cord or

battery. Installation is now complete.

DIMM installation

Using firm, even pressure, push DIMM into slot until

clips snap into place. Do not assist clips.

SODIMM installation

Firmly push the SODIMM in at a 45-degree angle,

and then push down until clips snap into place.

When it is fully seated in the slot, one-sixteenth of an inch or less

of the gold pins will be visible.

Produkt Specifikationer

Mærke:	Crucial
Kategori:	Ikke kategoriseret
Model:	CP16G4DFRA32A
Intern hukommelse:	16 GB
Bæredygtighedscertifikater:	REACH, RoHS
Intern hukommelsestype:	DDR4
Hukommelsesur hastighed:	3200 MHz
Overholdelse af bæredygtighed:	Ja
Komponent til:	PC/server
Hukommelsesspænding:	1.2 V
Hukommelseslayout (moduler x størrelse):	1 x 16 GB
Maksimal blænderåbning:	22
Pufret hukommelsestype:	Unregistered (unbuffered)