Crystorama Andover AND-9207-CL-MK Manual

Crystorama Ikke kategoriseret Andover AND-9207-CL-MK

Læs gratis den danske manual til Crystorama Andover AND-9207-CL-MK (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Crystorama Andover AND-9207-CL-MK, eller vil du spørge andre brugere om produktet?

Side 1/2
ASSEMBLY INSTRUCTION MODEL #AND-9207-CL-MK
You will need 1 - Medium Bulb
60 Watts Recommended 100 Watts Max.
(Bulb not included)
USE LED BULBS FOR EXTENDED USE
THIS FIXTURE IS WET RATED
1. To install the glass shade, separate the Bottom
Cage by removing the Nut.
2. Insert the Glass Shade into the Bottom Cage.
3. Install the bulb into the socket.
4. Attach the Bottom Cage to the Top Cage by
screwing a Nut securing the two together.
5. Place the fixture over the post and mark 3 points
on the post at the center of each hole on the post
fitter.
6. Drill the holes at the marked points
7. Make the wire connections then place the fixture
base over the post and secure down by
tightening the screws
Crystorama.comCrystorama.com
Glass Replacement:
Follow instruction steps #1-7, in reverse,
skipping step #3, #5 and #6.
Bulb Replacement (Bulb not included):
Follow instruction steps #1-7, in reverse,
skipping step #5 and #6.
3" [76]


Produkt Specifikationer

Mærke: Crystorama
Kategori: Ikke kategoriseret
Model: Andover AND-9207-CL-MK

Har du brug for hjælp?

Hvis du har brug for hjælp til Crystorama Andover AND-9207-CL-MK stil et spørgsmål nedenfor, og andre brugere vil svare dig